Dai Ze-lin, Xu Xiang-dong, Gu Yu, Zou Rui-jiao, Han Shou-sheng, Peng Yong, Lian Yu-xiang, Wang Fu, Li Xin-rong, Chen Zhe-geng, Sun Ming-hui, Jiang Ya-dong
Guang Pu Xue Yu Guang Pu Fen Xi. 2017 Mar;37(3):697-703.
In this work, regenerated cellulose films were prepared with an iced dissolution method, while the physical morphologies and crystal types of the products were systematically characterized with scanning electron microscope (SEM), Fourier transform infrared(FTIR), while X-Ray Diffraction (XRD). The results demonstrate that the as-prepared continuous and uniform films are indeed cellulose Ⅱ, whose morphology and crystal type are significantly different from those of the degreased cotton. Moreover, Terahertz time domain system (THz-TDS) and FTIR were employed to measure the THz spectra of the regenerated cellulose films. Accordingly, the THz characteristic peaks for the regenerated cellulose films are experimentally identified for the first time. In addition, the increase of the THz transmittance with the decrease of the wavenumber is attributed to the existence of amorphous components in the regenerated cellulose films. Although the shapes of Far-IR spectra in the range of 100~700 cm-1 are similar, the absorption peaks of the regenerated cellulose films move to lower wavenumbers (blue shift) compared with those of the degreased cotton. Based on this, we developed a new approach to distinguish the allomorphism of cellulose Ⅱ and cellulose Iβ by Far-IR. Particularly, geometry optimization and IR calculation for the crystal structure of cellulose Ⅱ have been successfully processed by Density Functional Theory (DFT) using periodic boundary condition via CASTEP package. The calculated absorption peak positions are in good agreement with those experimentally measured. Consequently, the THz characteristic peaks of the regenerated cellulose films have been systematically and successfully assigned. Theoretical calculations reveal that the peaks at 42 and 54 cm-1 are assigned to the lattice vibration modes coupled with translational mode and rotational mode, respectively. Moreover, the absorption peaks in the range of 68~238 cm-1 are related with the torsion vibration of —CH2OH group and deformation vibration of C—H bond and O—H bond, while those in the range of 351~583 cm-1 are assigned to the skeletal vibration of C—O—C bond and pyranoid ring, and those at 611 and 670 cm-1 are originated from the out-of-plane bending vibration of O—H bond. Each absorption peak is involved in more than single vibration mode. The THz spectra presented in this work, together with the theoretical simulations, indicate that the THz responses of regenerated cellulose are closely associated with both its chemical constituents and molecular structure. These results will be helpful not only for better understanding the relations between the molecular structure of the regenerated cellulose and its THz spectrum, but also for providing valuable information for future studies on the physical mechanisms of THz responses of other partially-crystalline polymers and organic biological macromolecules.
在本工作中,采用冰浴溶解法制备了再生纤维素膜,同时利用扫描电子显微镜(SEM)、傅里叶变换红外光谱仪(FTIR)以及X射线衍射仪(XRD)对产物的物理形态和晶体类型进行了系统表征。结果表明,所制备的连续且均匀的膜确实为纤维素Ⅱ,其形态和晶体类型与脱脂棉显著不同。此外,利用太赫兹时域系统(THz - TDS)和FTIR测量了再生纤维素膜的太赫兹光谱。据此,首次通过实验确定了再生纤维素膜的太赫兹特征峰。另外,太赫兹透过率随波数降低而增加归因于再生纤维素膜中无定形组分的存在。尽管在100~700 cm-1范围内远红外光谱的形状相似,但与脱脂棉相比,再生纤维素膜的吸收峰向更低波数移动(蓝移)。基于此,我们开发了一种通过远红外区分纤维素Ⅱ和纤维素Iβ同质多晶型的新方法。特别地,利用CASTEP软件包通过密度泛函理论(DFT)在周期性边界条件下成功地对纤维素Ⅱ的晶体结构进行了几何优化和红外计算。计算得到的吸收峰位置与实验测量值吻合良好。因此,已系统且成功地归属了再生纤维素膜的太赫兹特征峰。理论计算表明,42和54 cm-1处的峰分别归属于与平移模式和旋转模式耦合的晶格振动模式。此外,68~238 cm-1范围内的吸收峰与—CH2OH基团的扭转振动以及C—H键和O—H键的变形振动有关,351~583 cm-1范围内的吸收峰归属于C—O—C键和吡喃环的骨架振动,611和670 cm-1处的峰源于O—H键的面外弯曲振动。每个吸收峰都涉及不止一种振动模式。本工作中呈现的太赫兹光谱以及理论模拟表明,再生纤维素的太赫兹响应与其化学成分和分子结构密切相关。这些结果不仅有助于更好地理解再生纤维素的分子结构与其太赫兹光谱之间的关系,还为未来研究其他部分结晶聚合物和有机生物大分子的太赫兹响应物理机制提供了有价值的信息。