Microplastic abundance and characteristics in French Atlantic coastal sediments using a new extraction method.

The ubiquitous presence of microplastics (MPs) has been demonstrated in all environmental compartments in the recent years. They are detected in air, freshwater, soil, organisms and particularly in marine ecosystems. Since sediments are known to be the major sink of many organic and inorganic pollutants, the aim of this study was to develop and validate a fast and cheap methodology to assess the MP contamination in intertidal sediments from the Gulf of Biscay (Pays de la Loire region, France). Sediments were sampled at three locations (Pays de la Loire region, France) and during two seasons: October 2015 and March 2016. The analytical protocol involved MP extraction from dried sediments using milliQ water and a centrifugation technique. After a filtration step of supernatants, MPs were detected and directly identified on the membrane filters using μFTIR spectroscopy in reflection mode. For the first time, the number of replicates allowing to obtain a satisfying representativeness of the whole sampled sediment was also evaluated at 10 replicates of 25 g each. The average number of MPs in sediments was 67 (±76) MPs/kg dw (N = 60) with no significant difference between sites and seasons. Ten different compositions of MPs were defined by μFT-IR with a high proportion of polypropylene (PP) and polyethylene (PE), 38 and 24%, respectively. Among MPs, mainly fragments (84%) were observed with main size classes corresponding to [>100 μm] and [50-100 μm] but no particles > 1 mm could be found suggesting that mainly small microplastics (<1 mm) were subject to vertical transport.