Lehman Christopher M, Pearson Lauren, Salmond Jennifer, Raphael Kalani, Schmidt Robert L
Department of Pathology, University of Utah Health, Salt Lake City, UT.
ARUP Laboratories, University of Utah Health, Salt Lake City, UT.
Lab Med. 2019 Apr 8;50(2):202-207. doi: 10.1093/labmed/lmy062.
The Jaffe and enzymatic methods are the 2 most common methods for creatinine measurement. The Jaffe method is less expensive but subject to interferences. Some laboratory scientists have called for the Jaffe method to be retired.
To determine the most cost-effective and safe protocol for creatinine measurement.
We performed a retrospective database review of all outpatient creatinine measurements for 1 year, testing the risk-based reflex testing protocol we had implemented for creatinine measurement. Samples were first measured using the Jaffe method and were reflexed to the enzymatic method if the estimated glomerular filtration rate (eGFR) was between 55 and 65 mL per min per 1.73 m2.
There were 104,530 creatinine measurements, of which 11,420 (10.9%) were reflexed to the enzymatic method. The Jaffe method had a positive bias of 0.08 mg per dL (-6.14 mL/min/1.73 m2 eGFR). A total of 3.4% of the paired reflexed specimens were discordant. Also, 133 (1.2%) of the Jaffe results were classified as false negatives and 3411 (29.9%) were classified as false positives. None of the false-negative results and 5 of the false-positive results were considered clinically significant. Using the reflex protocol saved approximately $40,000 per year.
The reflex protocol for creatinine measurement can reduce costs with acceptable risk.
Jaffe法和酶法是测定肌酐的两种最常用方法。Jaffe法成本较低,但容易受到干扰。一些实验室科学家呼吁淘汰Jaffe法。
确定最具成本效益且安全的肌酐测定方案。
我们对1年中所有门诊患者的肌酐测量进行了回顾性数据库审查,测试了我们为肌酐测量实施的基于风险的反射检测方案。样本首先使用Jaffe法进行测量,如果估计肾小球滤过率(eGFR)在每分钟每1.73平方米55至65毫升之间,则将样本转至酶法进行检测。
共进行了104,530次肌酐测量,其中11,420次(10.9%)转至酶法检测。Jaffe法的正偏差为每分升0.08毫克(-6.14毫升/分钟/1.73平方米eGFR)。配对的反射样本中共有3.4%不一致。此外,Jaffe法结果中有133次(1.2%)被分类为假阴性,3411次(29.9%)被分类为假阳性。假阴性结果均无临床意义,假阳性结果中有5次有临床意义。使用反射方案每年可节省约40,000美元。
肌酐测量的反射方案可以在可接受的风险下降低成本。