Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, PR China; School of Chemical Engineering & Technology, Tianjin University, Tianjin, 300072, PR China; Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin, 300072, PR China.
Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, PR China.
J Hazard Mater. 2019 Feb 15;364:91-99. doi: 10.1016/j.jhazmat.2018.09.069. Epub 2018 Sep 29.
Identification the polymerization nature of vanadium bearing solution is difficult, yet it is of great environmental concern due to the possible carcinogenic effects as well as high-value sustainable necessities. Thus, seeking for simple and efficient characterization methods of tracking vanadium species is in urgent demand. In this work, high-resolution electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) coupled with thermodynamic calculations was employed to measure vanadium-containing samples. Evolutions of four characteristic vanadium species, HVO (0-1%), V species (0-1%), V species (1-20%), and V species (60-95%), were comprehensively studied from acidic to neutral conditions, based on which thermodynamic model and vanadium phase diagram were established to visualize transformation pathways. More than 30 types of aqueous vanadium species could be semi-quantitatively detected by employing this method with less than 5% relative error, and the corresponding existing forms and concentration of these vanadium species could be well predicted. The vanadium species identified in MS results were confirmed by NMR. This method can be widely used for the understanding of vanadium speciation in practical examples, especially involving V(V), Cr(VI) ions or organic complexes.
鉴定含钒溶液的聚合性质具有一定难度,但由于其可能具有致癌作用以及对高价值可持续性的需求,因此引起了人们的极大关注。因此,迫切需要寻求简单有效的钒形态跟踪的特征化方法。在这项工作中,采用高分辨率电喷雾电离飞行时间质谱(ESI-TOF-MS)结合热力学计算来测量含钒样品。全面研究了四种特征钒物种(HVO(0-1%)、V 物种(0-1%)、V 物种(1-20%)和 V 物种(60-95%))在从酸性到中性条件下的演变情况,在此基础上建立了热力学模型和钒相图,以可视化转化途径。通过该方法可以半定量检测出 30 多种类型的水合钒物种,相对误差小于 5%,并且可以很好地预测这些钒物种的存在形式和浓度。通过 NMR 对 MS 结果中鉴定的钒物种进行了确认。该方法可广泛用于理解实际例子中的钒形态,特别是涉及 V(V)、Cr(VI)离子或有机络合物的例子。