Assessment on the effects of aluminum-modified clay in inactivating internal phosphorus in deep eutrophic reservoirs.

Aluminum-salt inactivating agents are extensively applied to the restoration of lakes polluted by internal phosphorus (hereinafter referred to as "P"). However, there is a lack of micromechanism information regarding the sediment P cycle and its interactions with aluminum salts, which has restricted the engineering applications of aluminum salts. In this study, a sediment core incubation system was used to simulate the influence of aerobic and anaerobic conditions on the effectiveness and stability of aluminum-modified clay (AMC). This study also investigated the millimeter-scale dynamics of P across the sediment-water interface (SWI) using the HR-Peeper and DGT techniques. According to the results, sediment P release mainly occurred under anaerobic conditions. When the incubation system was in an anaerobic state, AMC effectively reduced the internal-P loading. In pore water, there was a positive correlation between soluble Fe and SRP, suggesting that the reductive dissolution of Fe-P constituted the main mechanism of sediment P release. After with dosing AMC, the concentrations of SRP and labile P in the capping layer both dropped abruptly to low levels and the content of Al-P in surface sediments rose, suggesting that AMC had strongly adsorbed phosphates, formed inert Al-P and blocked the phosphate exchange between pore water and overlying water. This study elaborated on the micromechanism of the control of sediment internal P input by AMC and revealed that Al-P precipitation constituted the main mechanism of the inhibition of sediment P release by aluminum-salt inactivating agents. The research findings have a great significance for guiding field applications of aluminum-salt inactivating agents.