Aortic Lumen Area Is Increased in Ruptured Abdominal Aortic Aneurysms and Correlates to Biomechanical Rupture Risk.

PURPOSE

To investigate how 2-dimensional geometric parameters differ between ruptured and asymptomatic abdominal aortic aneurysms (AAAs) and provide a biomechanical explanation for the findings.

METHODS

The computed tomography angiography (CTA) scans of 30 patients (mean age 77±10 years; 23 men) with ruptured AAAs and 60 patients (mean age 76±8 years; 46 men) with asymptomatic AAAs were used to measure maximum sac diameter along the center lumen line, the cross-sectional lumen area, the total vessel area, the intraluminal thrombus (ILT) area, and corresponding volumes. The CTA data were segmented to create 3-dimensional patient-specific models for finite element analysis to compute peak wall stress (PWS) and the peak wall rupture index (PWRI). To reduce confounding from the maximum diameter, 2 diameter-matched groups were selected from the initial patient cohorts: 28 ruptured AAAs and another with 15 intact AAAs (diameters 74±12 vs 73±11, p=0.67). A multivariate model including the maximum diameter, the lumen area, and the ILT area of the 60 intact aneurysms was employed to predict biomechanical rupture risk parameters.

RESULTS

In the diameter-matched subgroup comparison, ruptured AAAs had a significantly larger cross-sectional lumen area (1954±1254 vs 1120±623 mm, p=0.023) and lower ILT area ratio (55±24 vs 68±24, p=0.037). The ILT area (2836±1462 vs 2385±1364 mm, p=0.282) and the total vessel area (3956±1170 vs 4338±1388 mm, p=0.384) did not differ statistically between ruptured and intact aneurysms. The PWRI was increased in ruptured AAAs (0.80 vs 0.48, p<0.001), but the PWS was similar (249 vs 284 kPa, p=0.194). In multivariate regression analysis, lumen area was significantly positively associated with both PWS (p<0.001) and PWRI (p<0.01). The ILT area was also significantly positively associated with PWS (p<0.001) but only weakly with PWRI (p<0.01). The lumen area conferred a higher risk increase in both PWS and PWRI when compared with the ILT area.

CONCLUSION

The lumen area is increased in ruptured AAAs compared to diameter-matched asymptomatic AAAs. Furthermore, this finding may in part be explained by a relationship with biomechanical rupture risk parameters, in which lumen area, irrespective of maximum diameter, increases PWS and PWRI. These observations thus suggest a possible method to improve prediction of rupture risk in AAAs by measuring the lumen area without the use of computational modeling.