Suppr超能文献

利用大气压化学电离的声波雾化增强离子信号。

Surface Acoustic Wave Nebulization with Atmospheric-Pressure Chemical Ionization for Enhanced Ion Signal.

机构信息

University of South Florida , Tampa , Florida 33620 , United States.

Federal Institute for Materials Research and Testing (BAM) , 12489 Berlin , Germany.

出版信息

Anal Chem. 2019 Jan 2;91(1):912-918. doi: 10.1021/acs.analchem.8b03927. Epub 2018 Dec 10.

Abstract

Many ambient desorption/ionization mass spectrometry (ADI-MS) techniques rely critically on thermal desorption. Meanwhile, the analyte classes that are successfully studied by any particular ADI-MS methods are strongly dependent on the type of ionization source. Generally, spray-based ionization sources favor polar analytes, whereas plasma-based sources can be used for more hydrophobic analytes and are more suitable for molecules with small molar masses. In the present work, classic atmospheric-pressure chemical ionization (APCI) is used. To provide improved desorption performance for APCI, a surface acoustic wave nebulization (SAWN) device was implemented to convert liquid analytes into fine airborne particles. Compared to conventional SAWN that is used solely as an ionization source for liquid samples, the coupling of SAWN and APCI significantly improves ion signal by up to 4 orders of magnitude, reaching comparable ion abundances to those of electrospray ionization (ESI). Additionally, this coupling also extends the applicable mass range of an APCI source, conventionally known for the ionization of small molecules <500 Da. Herein, we discuss cursory evidence of this applicability to a variety of analytes including both polar and nonpolar small molecules and novel peptides that mimic biomolecules upward of 1000 Da. Observed species are similar to ESI-derived ions including doubly charged analyte ions despite presumably different charging mechanisms. SAWN-APCI coupling may thus involve more nuanced ionization pathways in comparison to other ADI approaches.

摘要

许多环境解吸/电离质谱(ADI-MS)技术严重依赖热解吸。同时,任何特定 ADI-MS 方法成功研究的分析物类别强烈依赖于电离源的类型。一般来说,基于喷雾的电离源有利于极性分析物,而基于等离子体的源可用于疏水性分析物,并且更适合摩尔质量较小的分子。在本工作中,使用经典的大气压化学电离(APCI)。为了为 APCI 提供改进的解吸性能,实现了表面声波雾化(SAWN)装置,将液体分析物转化为细小的空气悬浮颗粒。与仅用作液体样品电离源的常规 SAWN 相比,SAWN 和 APCI 的耦合将离子信号提高了 4 个数量级,达到与电喷雾电离(ESI)相当的离子丰度。此外,这种耦合还扩展了 APCI 源的适用质量范围,通常可用于电离小分子<500 Da。在这里,我们讨论了这种适用性的初步证据,包括各种极性和非极性小分子以及模拟生物分子高达 1000 Da 的新型肽。尽管可能存在不同的充电机制,但观察到的物质与 ESI 衍生的离子相似,包括双电荷分析物离子。因此,与其他 ADI 方法相比,SAWN-APCI 耦合可能涉及更细微的电离途径。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验