Suppr超能文献

基于多目标迭代优化算法的滚动轴承多故障诊断最优小波滤波器选择

Multi-objective iterative optimization algorithm based optimal wavelet filter selection for multi-fault diagnosis of rolling element bearings.

作者信息

Ding Chuancang, Zhao Ming, Lin Jing, Jiao Jinyang

机构信息

Shaanxi Key Laboratory of Mechanical Product Quality Assurance and Diagnostics, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi Province 710049, China.

Science & Technology on Reliability and Environmental Engineering Laboratory, School of Reliability and Systems Engineering, Beihang University, Xueyuan Road No. 37, Haidian District, Beijing, China.

出版信息

ISA Trans. 2019 May;88:199-215. doi: 10.1016/j.isatra.2018.12.010. Epub 2018 Dec 11.

Abstract

Rolling element bearings (REBs) play an essential role in modern machinery and their condition monitoring is significant in predictive maintenance. Due to the harsh operating conditions, multi-fault may co-exist in one bearing and vibration signal always exhibits low signal-to-noise ratio (SNR), which causes difficulties in detecting fault. In the previous studies, maximum correlated kurtosis deconvolution (MCKD) has been validated as an efficient method to extract fault feature in the fault signals. Nonetheless, there are still some challenges when MCKD is applied to fault detection owing to the rigorous requirements of multiple input parameters. To overcome limitation, a multi-objective iterative optimization algorithm (MOIOA) for multi-fault diagnosis is proposed. In this method, correlated kurtosis (CK) is taken as a criterion to select optimal Morlet wavelet filter using the whale optimization algorithm (WOA). Meanwhile, to further eliminate the effect of the inaccurate period on CK, the update process of period is incorporated. After that, the simulated and experimental signals are utilized to testify the validity and superiority of the MOIOA for multiple faults detection by the comparison with MCKD. The results indicate that MOIOA is efficient to extract weak fault features even with heavy noise and harmonic interferences.

摘要

滚动轴承在现代机械中起着至关重要的作用,其状态监测在预测性维护中具有重要意义。由于运行条件恶劣,单个轴承可能同时存在多种故障,且振动信号的信噪比(SNR)通常较低,这给故障检测带来了困难。在以往的研究中,最大相关峭度解卷积(MCKD)已被验证为一种从故障信号中提取故障特征的有效方法。然而,由于MCKD对多个输入参数有严格要求,在应用于故障检测时仍存在一些挑战。为克服这些限制,提出了一种用于多故障诊断的多目标迭代优化算法(MOIOA)。在该方法中,以相关峭度(CK)为准则,使用鲸鱼优化算法(WOA)选择最优的Morlet小波滤波器。同时,为进一步消除不准确周期对CK的影响,引入了周期更新过程。之后,通过与MCKD对比,利用模拟信号和实验信号验证了MOIOA在多故障检测中的有效性和优越性。结果表明,即使在存在强噪声和谐波干扰的情况下,MOIOA也能有效地提取微弱故障特征。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验