Suppr超能文献

应用干热处理增强低热非脂乳固体干物质的功能性。

Application of a dry heat treatment to enhance the functionality of low-heat nonfat dry milk.

机构信息

Food Science Institute, Kansas State University, Manhattan 66506.

Biological Systems Engineering, and Food Science and Technology Department, University of Nebraska, Lincoln 68583.

出版信息

J Dairy Sci. 2019 Feb;102(2):1096-1107. doi: 10.3168/jds.2018-15254. Epub 2018 Dec 26.

Abstract

Nonfat dry milk is a valuable food and ingredient because it contains proteins, fat, carbohydrates, minerals, and vitamins. When manufactured, this product is classified into high heat (HH) or low heat (LH) depending on the pre-heat treatment used in pasteurization. Radio frequency dielectric heating, if used alone or as part of a dry heat technology, may induce component interactions in milk powders, which could alter or improve functionality. To pursue this objective, LH was subjected to radio frequency dielectric heating to 80, 85, and 90°C with a subsequent hold period of 60 or 90 min in an oven, set at the designated temperature, 80, 85, or 90°C, assessed for functionality in liquid and gel systems, cooled, and subsequently compared with LH and HH. The functionality assessment included heat stability and foaming, emulsion, and gelling properties. For foaming, LH presented a statistically lower overrun and foam stability compared with all dry-heated LH. The LH dry-heated at ≥85°C exhibited significantly greater foaming capacity than did the LH. Emulsification properties were not significantly different as a function of dry heating compared with LH. As gels, water-holding capacity was greater and syneresis was significantly less for all gels made with the dry-heated LH at <85°C. Gel firmness and cohesiveness were not affected by dry heating. The heat coagulation time at native pH was significantly greater for LH that were dry-heated for 90 min compared with LH. At adjusted pH (6.4 to 7.2), the heat stability was improved if the LH was dry-heated. The dry-heated LH had significantly less foaming properties, but greater emulsion activity compared with the HH. Overall, the dry heat treatment conditions of this study did not result in acid-induced gels with equivalent properties as gels made with HH. Syneresis was similar for all gels except for those made from the dry-heated LH to 90°C and held for 60 min, as this gel had significantly more syneresis than did the gels made from HH. However, the heat stability of dry-heated LH at native, 6.8, 7.0, and 7.2 pH was greater compared with the heat stability of HH. The application of a dry heat treatment enhanced the functional properties of LH, opening the opportunity to develop food products that can use this modified nonfat dry milk such as ice cream, bakery, and meat products.

摘要

脱脂奶粉是一种很有价值的食品和配料,因为它含有蛋白质、脂肪、碳水化合物、矿物质和维生素。在生产过程中,根据巴氏杀菌过程中使用的预热处理,将该产品分为高热(HH)或低热(LH)。如果单独使用或作为干热技术的一部分使用射频介电加热,可能会导致奶粉中的成分相互作用,从而改变或改善其功能。为了实现这一目标,将 LH 用射频介电加热至 80、85 和 90°C,随后在设定温度为 80、85 或 90°C 的烘箱中保持 60 或 90min,评估其在液体和凝胶系统中的功能,冷却,然后与 LH 和 HH 进行比较。功能评估包括热稳定性和起泡性、乳化和胶凝性能。对于起泡性,与所有经干热处理的 LH 相比,LH 的膨胀率和泡沫稳定性较低。在≥85°C 下干热处理的 LH 表现出比 LH 更高的起泡能力。与 LH 相比,乳化性能在干热处理方面没有显著差异。作为凝胶,在所有用<85°C 下干热处理的 LH 制成的凝胶中,持水性更大,离浆率显著更低。凝胶的硬度和内聚性不受干热处理的影响。与 LH 相比,在自然 pH 下,经 90min 干热处理的 LH 的热凝固时间显著增加。在调整 pH(6.4 至 7.2)后,如果 LH 经过干热处理,其热稳定性得到改善。与 HH 相比,干热处理的 LH 的起泡性能显著降低,但乳化活性更高。总的来说,本研究的干热处理条件并未导致酸性诱导的凝胶具有与 HH 制成的凝胶相同的性质。除了那些在 90°C 下干热处理并保持 60min 的 LH 制成的凝胶外,所有凝胶的离浆率都相似,因为这种凝胶的离浆率明显高于 HH 制成的凝胶。然而,与 HH 相比,在自然、6.8、7.0 和 7.2pH 下,干热处理的 LH 的热稳定性更高。干热处理的应用增强了 LH 的功能特性,为开发可以使用这种改良的脱脂奶粉的食品产品提供了机会,例如冰淇淋、面包店和肉类产品。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验