Rajabi-Toustani Reza, Akter Quzi Sharmin, Almadaly Essam A, Hoshino Yoichiro, Adachi Hiromichi, Mukoujima Koushi, Murase Tetsuma
Laboratory of Veterinary Theriogenology, Joint Department of Veterinary Medicine, Faculty of Applied Biological Sciences, Gifu University, Gifu 501-1193, Japan.
Department of Theriogenology, Faculty of Veterinary Medicine, Kafrelsheikh University, El-Geish street, 33516 Kafrelsheikh, Egypt.
J Vet Med Sci. 2019 May 11;81(5):694-702. doi: 10.1292/jvms.18-0560. Epub 2019 Jan 1.
This study aimed to improve the staining of frozen-thawed Japanese Black bull sperm acrosomes with fluorescein isothiocyanate-conjugated peanut agglutinin (FITC-PNA). Spermatozoa were washed, fixed with 1-3% paraformaldehyde (PFA) in suspension for 10, 20, and 30 min, permeabilized with 0-2% Triton X-100 for 5 min, stained with FITC-PNA, and mounted with different antifade agents (0.22 M 1,4-diazabicyclo [2,2,2] octane (DABCO), SlowFade®, and ProLong®) in suspension (In-suspension) or on a smear (On-smear). The spermatozoa were categorized into seven pattern types either immediately or after storage for 24 hr. Experiment 1 showed that 1) the In-suspension method was better than the On-smear method; 2) if spermatozoa were stained using the In-suspension method and examined immediately, the best antifade agent was SlowFade®; 3) if samples were to be stored after staining using the On-smear method, DABCO should be avoided; 4) if spermatozoa were stained using the In-suspension method, storage of the stained samples was not recommended; and 5) if samples were to be stored after staining using the In-suspension method, ProLong® might be the best antifade agent. The results of experiment 2 showed that the concentration of Triton X-100 could be reduced to 0.1 from 1%. The results of experiment 3 showed that the paraformaldehyde concentration used for a 30 min fixation could be reduced from 3 to 2%. It is expected that the improved staining protocol will be useful to determine bull sperm acrosomal integrity.
本研究旨在改进用异硫氰酸荧光素偶联花生凝集素(FITC-PNA)对冻融后的日本黑牛精子顶体进行染色的方法。精子经洗涤后,在悬浮液中用1%-3%的多聚甲醛(PFA)固定10、20和30分钟,用0%-2%的曲拉通X-100通透处理5分钟,用FITC-PNA染色,然后在悬浮液中(悬浮法)或涂片上(涂片法)用不同的抗褪色剂(0.22 M 1,4-二氮杂双环[2,2,2]辛烷(DABCO)、SlowFade®和ProLong®)封片。精子立即或储存24小时后被分为七种模式类型。实验1表明:1)悬浮法优于涂片法;2)如果用悬浮法对精子进行染色并立即检查,最佳抗褪色剂是SlowFade®;3)如果涂片法染色后的样本要储存,应避免使用DABCO;4)如果用悬浮法对精子进行染色,不建议储存染色后的样本;5)如果悬浮法染色后的样本要储存,ProLong®可能是最佳抗褪色剂。实验2的结果表明曲拉通X-100的浓度可从1%降至0.1%。实验3的结果表明用于30分钟固定的多聚甲醛浓度可从3%降至2%。预期改进后的染色方案将有助于确定公牛精子顶体的完整性。