Suppr超能文献

应用频域光学相干断层扫描成像技术观察单次四步虹膜拉钩成形术后虹膜和瞳孔的形态。

Iris and knot configuration after Single Pass Four Throw (SFT) pupilloplasty as imaged by the spectral-domain optical coherence tomography.

机构信息

Dr Agarwal's Eye Hospital and Eye Research Centre, Chennai, Tamil Nadu, India.

出版信息

Indian J Ophthalmol. 2019 Feb;67(2):209-212. doi: 10.4103/ijo.IJO_885_18.

Abstract

PURPOSE

To analyze the morphological changes in the iris-knot complex configuration using spectral-domain optical coherence tomography (SD-OCT) following the single pass four throw (SFT) pupilloplasty.

METHODS

In this retrospective case series, eyes with SFT pupilloplasty were examined by SD-OCT (Optovue). Iris morphology compared to the normal iris, presence of specific patterns (single hump, double humps, peaks and valleys, tethering), prolene suture, knot complex (length and orientation), and intraocular lens (IOL) vault were evaluated.

RESULTS

Overall, 41 knots of 26 patients with a mean time duration of 3.1 ± 2 months from surgery were analyzed. Iris configurations seen were single hump (n = 28, 63.8%), double humps (n = 7, 17%), loop (n = 2, 4.8%), flat (n = 3, 7.3%), and mulberry (n = 1, 2.4%). The mean length and the height of the knot complex was 784.1 ± 433.7 μm and 317.7 ± 110.4 μm, respectively. Knot positions were at 3 clock hours in 9 eyes (21.9%), 9 in 8 eyes (19.5%), and others in 24 eyes (58.5%). Cut end of the prolene suture was detectable in 26 eyes (63.4%) as hyper-reflective line, and the mean cut length was 465.8 ± 321.1 μm. The suture was predominantly vertically oriented (80.6%) to the iris with a mean distance of 3.6 ± 0.3 mm (2.6-4 mm) away from corneal endothelium. The mean distance from the knot complex and the IOL was 289.2 ± 146 μm and the mean anterior chamber depth was 4.1 ± 0.1 mm.

CONCLUSION

A significant change in iris configuration was noted after SFT pupilloplasty, and vertically oriented retained prolene suture was predominant with good endothelial vault.

摘要

目的

使用频域光相干断层扫描(SD-OCT)分析单次四投(SFT)瞳孔成形术后虹膜结复合体形态的变化。

方法

在这项回顾性病例系列研究中,使用 SD-OCT(Optovue)检查了 SFT 瞳孔成形术的眼睛。比较了虹膜形态与正常虹膜的差异、存在的特定模式(单峰、双峰、峰谷、牵引)、聚丙烯缝线、结复合体(长度和方向)以及人工晶状体(IOL)拱顶。

结果

总体而言,分析了 26 名患者的 41 个结,从手术到研究的平均时间为 3.1±2 个月。观察到的虹膜形态包括单峰(n=28,63.8%)、双峰(n=7,17%)、环(n=2,4.8%)、扁平(n=3,7.3%)和桑椹状(n=1,2.4%)。结复合体的平均长度和高度分别为 784.1±433.7μm 和 317.7±110.4μm。结的位置在 9 只眼中为 3 点钟(21.9%),在 8 只眼中为 9 点钟(19.5%),在 24 只眼中为其他位置(58.5%)。26 只眼(63.4%)可检测到聚丙烯缝线的切割端呈高反射线,平均切割长度为 465.8±321.1μm。缝线主要垂直于虹膜,与角膜内皮的距离平均为 3.6±0.3mm(2.6-4mm)。结复合体与 IOL 的平均距离为 289.2±146μm,平均前房深度为 4.1±0.1mm。

结论

SFT 瞳孔成形术后虹膜形态发生显著变化,保留的聚丙烯缝线主要呈垂直方向,内皮拱顶良好。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/841e/6376818/f0e4e7678e98/IJO-67-209-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验