Gharravi Anneh Mohammad
Tissue Engineering and Stem Cells Research Center, Shahroud University of Medical Sciences, Shahroud, Iran.
Cell Tissue Bank. 2019 Mar;20(1):25-34. doi: 10.1007/s10561-019-09749-8. Epub 2019 Jan 23.
One of most important issue in the field of regenerative medicine is selection of appropriate cells, scaffolds and bioreactors. The present study aimed to investigate the appropriate method for the isolation of human UC-MSCs cells from explant cultured in alginate scaffold within novel perfusion bioreactor. MSCs were isolated with explant method and CD markers such CD73, CD31, CD90 and CD105 as were analyzed by flow cytometry. The culture chamber of the novel perfusion bioreactor was made from Plexiglas and housed the cell/scaffold constructs in the central part and the medium for the whole culture period. The flow behavior within the bioreactor chamber were performed for closed and open bypass systems. The shear stress profiles simulated using CFD modeling. The fluid flow distribution within the bioreactor chamber was performed in PBS solution containing a blue colorant. UC explants were resuspended in sodium alginate and were allowed to polymerize and placed in the perfusion bioreactor and cultured. MSCs were positive for mesenchymal markers such as CD73 and CD31. All 3D Perfusion bioreactor parts, except peristaltic pump was sterilizable by autoclaving. Results of CFD indicated very low wall shear stress on surface of culture chamber at flow rate 2 ml/min. The maximum wall shear stress was 1.10 × 10 m/s = 0.0110 dyne/cm (1 Pa = 10 dyne/cm). The fluid flow distribution within the alginate gel initially exhibited oscillation. In comparison, when encapsulated explants were placed in the perfusion bioreactor, cell proliferation appeared faster (4.6 × 10 ± 9.2 × 10) than explants cultures in 2D conventional culture method (3.2 × 10 ± 1 × 10). Proliferated cell formed several colonies. Migration of chondrocytes to the periphery of the alginate bead was visible after 1 week of culture. Perfusion bioreactor with low shear stress and alginate hydrogel improve cell isolation and expansion and eliminate cell passaging and enhance colony forming unit of UC-MSCs.
再生医学领域最重要的问题之一是选择合适的细胞、支架和生物反应器。本研究旨在探讨在新型灌注生物反应器中,从藻酸盐支架中培养的外植体中分离人脐带间充质干细胞(UC-MSCs)的合适方法。采用外植体法分离间充质干细胞,并通过流式细胞术分析CD73、CD31、CD90和CD105等CD标志物。新型灌注生物反应器的培养室由有机玻璃制成,在整个培养期间,细胞/支架构建体位于中央部分,培养基也在其中。对生物反应器腔室内的流动行为进行了封闭和开放旁路系统的测试。使用计算流体动力学(CFD)建模模拟剪切应力分布。在含有蓝色染料的磷酸盐缓冲盐水(PBS)溶液中进行生物反应器腔室内的流体流动分布测试。将脐带外植体重悬于海藻酸钠中,使其聚合,然后置于灌注生物反应器中进行培养。间充质干细胞的间充质标志物如CD73和CD31呈阳性。除蠕动泵外,所有3D灌注生物反应器部件均可通过高压灭菌进行消毒。CFD结果表明,在流速为2毫升/分钟时,培养室表面的壁面剪切应力非常低。最大壁面剪切应力为1.10×10米/秒 = 0.0110达因/厘米(1帕斯卡 = 10达因/厘米)。藻酸盐凝胶内的流体流动分布最初呈现振荡。相比之下,当将包封的外植体置于灌注生物反应器中时,细胞增殖似乎比二维传统培养方法中的外植体培养更快(4.6×10±9.2×10)(二维传统培养方法中为3.2×10±1×10)。增殖的细胞形成了几个集落。培养1周后,可见软骨细胞迁移至藻酸盐珠的周边。具有低剪切应力的灌注生物反应器和藻酸盐水凝胶可改善细胞分离和扩增,消除细胞传代,并增强脐带间充质干细胞的集落形成单位。