Department of Mechanical Engineering, University of Colorado at Boulder, Boulder, CO 80309, United States.
Department of Clinical Sciences, Colorado State University, Fort Colins, CO, United States.
Mater Sci Eng C Mater Biol Appl. 2019 Apr;97:1-11. doi: 10.1016/j.msec.2018.11.036. Epub 2018 Nov 30.
Readily-available small-diameter arterial grafts require a great combination of materials properties, including high strength, compliance, suturability, blood sealing and anti-thrombogenicity, as well as anti-kinking property for those used in challenging anatomical situations. We have constructed grafts composed of coaxially-structured polycaprolactone (PCL)/gelatin nanofibres, and tailored the material structures to achieve high strength, compliance and kink resistance, as well as excellent water sealing and anti-thrombogenicity. Coaxially-structured fibres in the grafts provided mechanical stability through the core, while flexibility and cell adhesion through the sheath. Results showed that graft compliance increased while strength decreased with the concentration ratio between core and sheath polymers. Compared to pure PCL fibrous surfaces, coaxial PCL/gelatin fibrous surfaces potently inhibited platelet adhesion and activation, providing excellent anti-thrombogenicity. To render sufficient burst strength and suturability, an additional layer of pure PCL was necessary to cap the layer of coaxial PCL/gelatin fibres. The two-layered grafts with the wall thickness comparable to native arteries demonstrated artery-like compliance and kink resistance, properties important to arteries under complex mechanical loading. The in vivo evaluation was performed using the interposition carotid artery graft model in rabbits for three months. Interestingly, results from ultrasonic imaging and histological analysis demonstrated that the two-layered grafts with a thinner outer PCL layer, which possessed higher compliance and kink resistance, showed increased blood flow, minimal lumen reduction and fibrosis. All vascular grafts exhibited patency and induced limited cell infiltration. Together, we presented a facile and useful approach to fabricate vascular grafts with superior graft performances, biomechanical properties, and blood compatibility. Grafts with artery-like compliance and flexibility have demonstrated improved implantation outcomes.
易于获得的小直径动脉移植物需要材料性能的高度结合,包括高强度、顺应性、可缝合性、血液密封和抗血栓形成性,以及在具有挑战性的解剖位置使用时的抗扭结性。我们构建了由同轴结构的聚己内酯(PCL)/明胶纳米纤维组成的移植物,并对材料结构进行了调整,以实现高强度、顺应性和抗扭结性,以及出色的水密封和抗血栓形成性。移植物中的同轴纤维通过芯部提供机械稳定性,通过鞘部提供柔韧性和细胞附着性。结果表明,随着芯部和鞘部聚合物浓度比的增加,移植物的顺应性增加,而强度降低。与纯 PCL 纤维表面相比,同轴 PCL/明胶纤维表面强力抑制血小板黏附和激活,提供出色的抗血栓形成性。为了提供足够的爆破强度和可缝合性,需要在同轴 PCL/明胶纤维层的顶部添加一层纯 PCL。具有与天然动脉相当的壁厚的双层移植物表现出类似动脉的顺应性和抗扭结性,这是在复杂机械负载下的动脉的重要特性。在三个月的时间里,使用兔颈动脉间置模型进行了体内评估。有趣的是,超声成像和组织学分析的结果表明,具有较薄的外部 PCL 层的双层移植物,具有更高的顺应性和抗扭结性,显示出增加的血流、最小管腔减少和纤维化。所有血管移植物均保持通畅,并引起有限的细胞浸润。总之,我们提出了一种简单而有用的方法来制造具有优异移植物性能、生物力学性能和血液相容性的血管移植物。具有类似动脉的顺应性和柔韧性的移植物已显示出改善的植入效果。