Liu Wenqiang, Borrell Marta Arias, Venerus David C, Mieler William F, Kang-Mieler Jennifer J
Biomedical Engineering, Illinois Institute of Technology, Chicago, IL, USA.
Chemical and Biological Engineering, Illinois Institute of Technology, Chicago, IL, USA.
Transl Vis Sci Technol. 2019 Jan 22;8(1):12. doi: 10.1167/tvst.8.1.12. eCollection 2019 Jan.
To characterize a biodegradable microsphere-hydrogel drug delivery system (DDS) for controlled and extended release of ranibizumab.
The degradable microsphere-hydrogel DDSs were fabricated by suspending ranibizumab-loaded or blank poly(lactic-glycolic acid) microspheres within a poly(ethylene glycol)--(L-lactic-acid) diacrylate/N-isopropylacrylamide (PEG-PLLA-DA/NIPAAm) hydrogel. The thermal responsive behavior of various DDS formulations was characterized in terms of volume phase transition temperature (VPTT) and swelling ratios changes from 22°C to 42°C. The mechanical properties were characterized using rheological methods. Degradability of hydrogels were also examined via wet weight loss. Finally, Iodine-125 was used to radiolabel ranibizumab for characterization of encapsulation efficiency and in vitro release.
All DDS formulations investigated were injectable through a 28-gauge needle at room temperature. The VPTT increased with increase of cross-linker concentration. The swelling ratios decreased as temperature increased and were not influenced by presence of microspheres. Rheology data confirmed that increase of cross-linker concentration and microsphere loading made DDS stiffer. Increase of degradable cross-linker concentration facilitated hydrogel in vitro degradation. Controlled release of ranibizumab were achieved for investigated DDS formulations for 6 months; and increased degradable cross-linker concentration produced faster and more complete release.
The biodegradable DDSs are suitable for sustained release of ranibizumab. Considering ease of injection, degradability and release of ranibizumab, DDS with 3 mM cross-linker concentration and less than 20 mg/mL microsphere loadings is more favorable for future application.
The investigated DDS is promising for controlled and extended release of anti-VEGF therapeutics to achieve better treatment regimen in ocular neovascularizations.
表征一种用于雷珠单抗控释和缓释的可生物降解微球 - 水凝胶药物递送系统(DDS)。
通过将负载雷珠单抗或空白的聚(乳酸 - 乙醇酸)微球悬浮在聚(乙二醇) - (L - 乳酸)二丙烯酸酯/N - 异丙基丙烯酰胺(PEG - PLLA - DA/NIPAAm)水凝胶中来制备可降解微球 - 水凝胶DDS。根据体积相变温度(VPTT)以及在22°C至42°C之间的溶胀率变化来表征各种DDS制剂的热响应行为。使用流变学方法表征机械性能。还通过湿重损失检查水凝胶的降解性。最后,使用碘 - 125对雷珠单抗进行放射性标记,以表征包封效率和体外释放。
所有研究的DDS制剂在室温下均可通过28号针头注射。VPTT随交联剂浓度的增加而增加。溶胀率随温度升高而降低,且不受微球存在的影响。流变学数据证实,交联剂浓度和微球负载量的增加使DDS更硬。可降解交联剂浓度的增加促进了水凝胶的体外降解。对于所研究的DDS制剂,雷珠单抗实现了6个月的控释;可降解交联剂浓度的增加导致更快且更完全的释放。
可生物降解的DDS适用于雷珠单抗的持续释放。考虑到注射的便利性、雷珠单抗的降解性和释放情况,交联剂浓度为3 mM且微球负载量小于20 mg/mL的DDS对未来应用更有利。
所研究的DDS有望用于抗VEGF治疗药物的控释和缓释,以在眼部新生血管形成中实现更好的治疗方案。