Faculty of Pharmacy, Shenyang Pharmaceutical University, Huatuo Road 26, Benxi, 117004, Liaoning, China.
School of Pharmacy, China Medical University, 77 Puhe Road, Shenyang North New Area, Shenyang, 110122, Liaoning, China.
AAPS PharmSciTech. 2019 Feb 5;20(3):102. doi: 10.1208/s12249-018-1273-z.
The purpose of this work is to investigate the effects of polymer/surfactant as carriers on the solubility and dissolution of fenofibrate solid dispersions (FF SDs) with the aid of systematic research on the physicochemical properties of the polymer/surfactant system and further highlight the importance of studying polymer/surfactant interaction in the preformulation. The critical micelle concentration (CMC) of sodium lauryl sulfate (SLS) and critical aggregation concentration (CAC) of polymer/SLS solutions were obtained through conductivity measurement. Meanwhile, surface tension, viscosity, morphology, and wettability of polymer/SLS with different weight ratios of SLS were analyzed to screen out the suitable content of SLS (weight%, 5% in carriers) incorporated in SDs. Polymer/SLS coprecipitate and FF SDs were prepared by the solvent evaporation method. The results from differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis showed that FF was molecularly dispersed in SDs. Compared to the solubility of FF in povidone/SLS (PVP/SLS) solutions, the increment of FF solubility in copovidone/SLS (VA64/SLS) solutions was due to the formation of free SLS micelles, which have been confirmed by transmission electron microscopy (TEM). Particularly, the wettability of FF SDs and physical mixtures (PMs) was also determined by the sessile drop technique. A linear relationship between the wettability of carriers and that of FF SDs was found, which revealed the significant role of carriers on the surface composition of FF SDs. As the molecular weight of PVP increased, the wettability of carriers decreased, thus leading to the reduction of the dissolution rate of SDs. Although the presence of SLS did not enhance the dissolution of FF SDs, it increased the amount of drug released at the initial stage. All these results indicated that the polymer/SLS interaction would affect the performance of SDs; hence, it was necessary to study their properties in the preformulation.
这项工作的目的是研究聚合物/表面活性剂作为载体对非诺贝特固体分散体(FF SDs)溶解度和溶解性能的影响。通过对聚合物/表面活性剂体系物理化学性质的系统研究,并进一步强调在预配方中研究聚合物/表面活性剂相互作用的重要性。通过电导率测量获得了十二烷基硫酸钠(SLS)的临界胶束浓度(CMC)和聚合物/SLS 溶液的临界聚集浓度(CAC)。同时,分析了不同 SLS 重量比的聚合物/SLS 的表面张力、粘度、形态和润湿性,以筛选出合适含量的 SLS(重量%,载体中 5%)掺入 SDs 中。通过溶剂蒸发法制备聚合物/SLS 共沉淀物和 FF SDs。差示扫描量热法(DSC)和 X 射线衍射(XRD)分析结果表明,FF 分子分散在 SDs 中。与 FF 在聚维酮/SLS(PVP/SLS)溶液中的溶解度相比,FF 在共聚维酮/SLS(VA64/SLS)溶液中的溶解度增加是由于游离 SLS 胶束的形成,这已通过透射电子显微镜(TEM)得到证实。特别是,通过 sessile 滴技术还确定了 FF SDs 和物理混合物(PM)的润湿性。发现载体的润湿性与 FF SDs 的润湿性之间存在线性关系,这表明载体对 FF SDs 表面组成的重要作用。随着 PVP 分子量的增加,载体的润湿性降低,从而导致 SDs 溶解速率降低。虽然 SLS 的存在并没有提高 FF SDs 的溶解性能,但它增加了药物在初始阶段的释放量。所有这些结果表明,聚合物/SLS 相互作用会影响 SDs 的性能;因此,有必要在预配方中研究它们的性质。