Department of Mechanical Engineering, Brigham Young University, Provo, Utah 84602, USA.
Department of Electrical and Computer Engineering, Brigham Young University, Provo, Utah 84602, USA.
J Acoust Soc Am. 2019 Feb;145(2):989. doi: 10.1121/1.5091009.
A method is presented for tracking the internal deformation of self-oscillating vocal fold models using magnetic resonance imaging (MRI). Silicone models scaled to four times life-size to lower the flow-induced vibration frequency were embedded with fiducial markers in a coronal plane. Candidate marker materials were tested using static specimens, and two materials, cupric sulfate and glass, were chosen for testing in the vibrating vocal fold models. The vibrating models were imaged using a gated MRI protocol wherein MRI acquisition was triggered using the subglottal pressure signal. Two-dimensional image slices at different phases during self-oscillation were captured, and in each phase the fiducial markers were clearly visible. The process was also demonstrated using a three-dimensional scan at two phases. The benefit of averaging to increase signal-to-noise ratio was explored. The results demonstrate the ability to use MRI to acquire quantitative deformation data that could be used, for example, to validate computational models of flow-induced vocal fold vibration and quantify deformation fields encountered by cells in bioreactor studies.
本文提出了一种使用磁共振成像(MRI)跟踪自激发声声带模型内部变形的方法。为降低流致振动频率,按四倍真人大小缩比的硅树脂模型在冠状面嵌入了基准标记物。使用静态样本测试候选标记材料,并选择硫酸铜和玻璃两种材料用于振动声带模型的测试。使用门控 MRI 协议对振动模型进行成像,其中 MRI 采集由声门下压力信号触发。在自激振期间的不同相位捕获二维图像切片,并且在每个相位都可以清楚地看到基准标记物。还在两个相位使用三维扫描演示了该过程。探索了平均以提高信噪比的好处。结果表明,可以使用 MRI 来获取定量变形数据,例如,用于验证流致声带振动的计算模型并量化生物反应器研究中细胞遇到的变形场。