Novel approach of phosphate-reclamation as struvite from sewage sludge by utilising hydrothermal carbonization.

Hydrothermal carbonization (HTC) showed promising performance as an alternative sewage sludge treatment already, as the draining ability of sludge is improved while fuel properties of the yielded hydrochar are superior to native sludge. On the other hand, the sole combustion of sewage sludge and its corresponding hydrochars are a waste in terms of nutrients like phosphorus and nitrogen. Therefore, a combination of HTC and a nutrient recycling strategy via the precipitation of phosphate and nitrogen as struvite (magnesium ammonium phosphate) are introduced in this research. We used an anaerobically digested sewage sludge with high loads of aluminium- and ironsalts. Phosphate release cannot be reached by HTC alone, as phosphate is heavily bound in stable iron- and aluminium-associations. An acid leaching step removes it from the hydrochar (58.5-94.8% P), while the process liquid arising from HTC is used as ammonium source (107-291 mmol lNH). After adjusting pH and addition of a magnesium source, struvite is rapidly precipitated in high purity. Nitric acid is used as a "catalyst" in HTC to improve the degree of carbonization on one hand but also improve the phosphate recovery on the other hand by increasing the amount of ammonium available for struvite formation in the process liquid. The highest total recovery rate of phosphate from sludge was 82.5 wt.% and therefore this approach showed to be a serious alternative to other P-recovery techniques.