Tampere University, Faculty of Engineering and Natural Sciences, P.O. Box 541, FI- 33104, Tampere University, Finland; CSIRO Land and Water, 147 Underwood Avenue, Floreat, Western Australia, 6014, Australia.
CSIRO Land and Water, 147 Underwood Avenue, Floreat, Western Australia, 6014, Australia.
J Hazard Mater. 2019 Jun 5;371:198-212. doi: 10.1016/j.jhazmat.2019.02.074. Epub 2019 Feb 21.
Biological reduction of soluble uranium from U(VI) to insoluble U(IV) coupled to the oxidation of an electron donor (hydrogen or organic compounds) is a potentially cost-efficient way to reduce the U concentrations in contaminated waters to below regulatory limits. A variety of microorganisms originating from both U contaminated and non-contaminated environments have demonstrated U(VI) reduction capacity under anaerobic conditions. Bioreduction of U(VI) is considered especially promising for in situ remediation, where the activity of indigenous microorganisms is stimulated by supplying a suitable electron donor to the subsurface to contain U contamination to a specific location in a sparingly soluble form. Less studied microbial biofilm-based bioreactors and bioelectrochemical systems have also shown potential for efficient U(VI) reduction to remove U from contaminated water streams. This review compares the advantages and challenges of U(VI)-reducing in situ remediation processes, bioreactors and bioelectrochemical systems. In addition, the current knowledge of U(VI) bioreduction mechanisms and factors affecting U(VI) reduction kinetics (e.g. pH, temperature, and the chemical composition of the contaminated water) are discussed, as both of these aspects are important in designing efficient remediation processes.
从 U(VI)到不溶性 U(IV)的可溶性铀的生物还原与电子供体(氢或有机化合物)的氧化相结合,是一种将受污染水中的 U 浓度降低到监管限值以下的潜在经济有效的方法。来自受 U 污染和未受污染环境的各种微生物已证明在厌氧条件下具有 U(VI)还原能力。U(VI)的生物还原被认为特别适合原位修复,其中通过向地下供应合适的电子供体来刺激土著微生物的活性,将 U 污染以一种难溶的形式限制在特定位置。基于微生物生物膜的生物反应器和生物电化学系统的研究较少,但也显示出了从受污染水流中有效去除 U 的潜力。本文综述了 U(VI)还原原位修复过程、生物反应器和生物电化学系统的优缺点。此外,还讨论了影响 U(VI)还原动力学的 U(VI)生物还原机制和因素(例如 pH 值、温度和受污染水的化学成分),因为这两个方面在设计高效修复过程中都很重要。