Marycz Krzysztof, Smieszek Agnieszka, Trynda Justyna, Sobierajska Paulina, Targonska Sara, Grosman Lukasz, Wiglusz Rafal J
Department of Experimental Biology, Faculty of Biology and Animal Science, Wroclaw University of Environmental and Life Sciences, ul. Norwida 27B, 50-375 Wroclaw, Poland.
Faculty of Veterinary Medicine, Equine Clinic-Equine Surgery, Justus-Liebig-University, 35392 Giessen, Germany.
Polymers (Basel). 2019 Jan 8;11(1):92. doi: 10.3390/polym11010092.
In response to the demand for new multifunctional materials characterized by high biocompatibility, hydrogel (HG) nanocomposites as a platform for bioactive compound delivery have been developed and fabricated. A specific crosslinking/copolymerization chemistry was used to construct hydrogels with a controlled network organization. The hydrogels were prepared using 3,6-anhydro-α-l-galacto-β-d-galactan (galactose hydrogel) together with resveratrol (trans-3,5,4'-trihydroxystilbene) and calcium hydroxyapatite nanoparticles. The resveratrol was introduced in three different concentrations of 0.1, 0.5, and 1 mM. Nanosized calcium hydroxyapatite was synthesized by a microwave-assisted hydrothermal technique, annealed at 500 °C for 3 h, and introduced at a concentration 10% (/). The morphology and structural properties of Ca(PO₄)₆(OH)₂ and its composite were determined by using XRPD (X-ray powder diffraction) techniques, as well as the absorption and IR (infrared) spectroscopy. The average nanoparticle size was 35 nm. The water affinity, morphology, organic compound release profile, and cytocompatibility of the obtained materials were studied in detail. The designed hydrogels were shown to be materials of biological relevance and of great pharmacological potential as carriers for bioactive compound delivery. Their cytocompatibility was tested using a model of human multipotent stromal cells isolated from adipose tissue (hASCs). The biomaterials increased the proliferative activity and viability of hASCs, as well as reduced markers of oxidative stress. In light of the obtained results, it has been thought that the designed materials meet the requirements of the tissue engineering triad, and may find application in regenerative medicine, especially for personalized therapies.
为响应对具有高生物相容性的新型多功能材料的需求,已开发并制备了水凝胶(HG)纳米复合材料作为生物活性化合物递送的平台。采用特定的交联/共聚化学方法构建具有可控网络结构的水凝胶。水凝胶是使用3,6 - 脱水-α-L-半乳糖-β-D-半乳聚糖(半乳糖水凝胶)与白藜芦醇(反式-3,5,4'-三羟基芪)和羟基磷灰石纳米颗粒制备而成。白藜芦醇以0.1、0.5和1 mM三种不同浓度引入。通过微波辅助水热技术合成纳米级羟基磷灰石,在500℃退火3小时,并以10%(/)的浓度引入。使用X射线粉末衍射(XRPD)技术以及吸收光谱和红外(IR)光谱来测定Ca(PO₄)₆(OH)₂及其复合材料的形态和结构性质。纳米颗粒的平均尺寸为35 nm。详细研究了所得材料的亲水性、形态、有机化合物释放曲线和细胞相容性。所设计的水凝胶被证明是具有生物学相关性且作为生物活性化合物递送载体具有巨大药理潜力的材料。使用从脂肪组织分离的人多能基质细胞(hASCs)模型测试了它们的细胞相容性。生物材料提高了hASCs的增殖活性和活力,并降低了氧化应激标志物。根据所得结果,认为所设计的材料满足组织工程三元组的要求,并可能在再生医学中找到应用,特别是用于个性化治疗。