Suppr超能文献

具有可控嵌段长度的聚左旋乳酸(PLLA)与聚右旋乳酸-聚乙二醇-聚右旋乳酸(PDLA-PEG-PDLA)共混物中的竞争性立体络合和同晶型行为

Competitive Stereocomplexation and Homocrystallization Behaviors in the Poly(lactide) Blends of PLLA and PDLA-PEG-PDLA with Controlled Block Length.

作者信息

Jing Zhanxin, Shi Xuetao, Zhang Guangcheng

机构信息

Ministry of Education Key Lab of Applied Physics and Chemistry in Space, College of Science, Northwestern Polytechnical University, Xi'an 710072, China.

出版信息

Polymers (Basel). 2017 Mar 15;9(3):107. doi: 10.3390/polym9030107.

Abstract

Stereocomplex poly(lactide) (PLA) was obtained by solution blending of linear PLLA and PDLA-PEG-PDLA. Effects of the L/D ratios, PEG block, and PDLA block on stereocomplexation of the blends are systemically discussed. The full stereocomplex PLA can be acquired by solution blending when L/D ratios are in the range of 7/3⁻5/5. The experiment results demonstrated that the stereocomplex degree of PLLA/PDLA-PEG-PDLA prepared by melt blending was closely related to the PEG block and PDLA block. POM results indicated that the blends with high L/D ratio showed large disordered spherulites, and the typical Maltese cross pattern was observed as the L/D ratios decreased. The results of PEG block on the stereocomplexation of PLLA/PDLA-PEG-PDLA revealed that the PEG blocks possessed two sides: accelerating agent for the mobility of polymer chains and decreasing nucleation capacity due to their diluting effect. The effect of PDLA block on the stereocomplexation of the blends was also well investigated. The results showed that the crystallization of sc-crystallites and hc-crystallites in the PLLA/PDLA-PEG-PDLA blends with different PDLA blocks presents an obvious competition relationship, and this is not beneficial to the formation of sc-crystallites with increasing PDLA block. The melting behavior of PLLA/PDLA-PEG-PDLA with different PDLA blocks after isothermal crystallization showed that the blends could achieve full stereocomplex when the crystallization temperature exceeded 160 °C, and a crystallite with high perfection could be formed as the crystallization temperature increased. This study systemically investigated the effects of the L/D ratios, PEG block, PDLA block, and crystallization conditions on stereocomplex crystallization of PLLA/PDLA-PEG-PDLA blends, which can provide potential approaches to control the microstructure and physical performances of PLLA/PDLA-PEG-PDLA blends.

摘要

通过线性聚左旋乳酸(PLLA)与聚右旋乳酸-聚乙二醇-聚右旋乳酸(PDLA-PEG-PDLA)的溶液共混制备了立体复合聚乳酸(PLA)。系统地讨论了L/D比、聚乙二醇(PEG)嵌段和聚右旋乳酸(PDLA)嵌段对共混物立体复合的影响。当L/D比在7/3至5/5范围内时,通过溶液共混可获得完全立体复合的PLA。实验结果表明,通过熔融共混制备的PLLA/PDLA-PEG-PDLA的立体复合程度与PEG嵌段和PDLA嵌段密切相关。偏光显微镜(POM)结果表明,L/D比高的共混物呈现出大的无序球晶,随着L/D比降低,观察到典型的马尔他十字图案。PEG嵌段对PLLA/PDLA-PEG-PDLA立体复合的影响表明,PEG嵌段具有两面性:聚合物链迁移率的促进剂以及由于其稀释作用而降低成核能力。还对PDLA嵌段对共混物立体复合的影响进行了深入研究。结果表明,具有不同PDLA嵌段的PLLA/PDLA-PEG-PDLA共混物中,立体复合晶体(sc-晶体)和六方晶体(hc-晶体)的结晶呈现出明显的竞争关系,并且随着PDLA嵌段增加,这对sc-晶体的形成不利。等温结晶后具有不同PDLA嵌段的PLLA/PDLA-PEG-PDLA的熔融行为表明,当结晶温度超过160℃时,共混物可实现完全立体复合,并且随着结晶温度升高可形成高度完美的晶体。本研究系统地研究了L/D比、PEG嵌段、PDLA嵌段和结晶条件对PLLA/PDLA-PEG-PDLA共混物立体复合结晶的影响,这可为控制PLLA/PDLA-PEG-PDLA共混物的微观结构和物理性能提供潜在途径。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/9433/6432197/04952e473bab/polymers-09-00107-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验