Liu Pan, Wang Lihua, Yue Yonghai, Song Shuangxi, Wang Xiaodong, Reddy Kolan Madhav, Liao Xiaozhou, Zhang Ze, Chen Mingwei, Han Xiaodong
Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
Nanoscale. 2019 May 9;11(18):8727-8735. doi: 10.1039/c9nr02053e.
We report experimental observation of room-temperature superplasticity and the distinct nanosize effect on the deformation mechanisms of Au nanowires. The Au nanowires were subjected to in situ tensile straining in a transmission electron microscope by using a home-made strain actuator, and a super large plastic strain with ∼150% uniform elongation and ∼260% total strain were observed before fracture. The plastic deformation started through full dislocation slip and was followed by the activities of stacking fault ribbons (or dissociated full dislocations) that were generated from surface sources and disappeared at the other end surfaces. With the reduction of the diameter of Au nanowires, the deformation changed to the twinning mode through partial dislocation emissions from sample surfaces. The mechanisms behind the observed phenomena are discussed in detail. These results shed light on the size-controlled plasticity of nano-metals.
我们报告了室温超塑性的实验观察结果以及金纳米线变形机制中独特的纳米尺寸效应。通过使用自制的应变驱动器,在透射电子显微镜中对金纳米线进行原位拉伸应变,在断裂前观察到了约150%的均匀伸长率和约260%的总应变的超大塑性应变。塑性变形首先通过全位错滑移开始,随后是从表面源产生并在另一端表面消失的堆垛层错带(或解离的全位错)的活动。随着金纳米线直径的减小,变形通过从样品表面发射部分位错转变为孪生模式。详细讨论了观察到的现象背后的机制。这些结果为纳米金属的尺寸控制可塑性提供了线索。