Sawada H, Sentoku Y, Yabuuchi T, Zastrau U, Förster E, Beg F N, Chen H, Kemp A J, McLean H S, Patel P K, Ping Y
University of Nevada Reno, Reno, Nevada 89557-0220, USA.
Institute of Laser Engineering, Osaka University, Suita 565-0871, Japan.
Phys Rev Lett. 2019 Apr 19;122(15):155002. doi: 10.1103/PhysRevLett.122.155002.
The rapid heating of a thin titanium foil by a high intensity, subpicosecond laser is studied by using a 2D narrow-band x-ray imaging and x-ray spectroscopy. A novel monochromatic imaging diagnostic tuned to 4.51 keV Ti Kα was used to successfully visualize a significantly ionized area (⟨Z⟩>17±1) of the solid density plasma to be within a ∼35 μm diameter spot in the transverse direction and 2 μm in depth. The measurements and a 2D collisional particle-in-cell simulation reveal that, in the fast isochoric heating of solid foil by an intense laser light, such a high ionization state in solid titanium is achieved by thermal diffusion from the hot preplasma in a few picoseconds after the pulse ends. The shift of Kα and formation of a missing Kα cannot be explained with the present atomic physics model. The measured Kα image is reproduced only when a phenomenological model for the Kα shift with a threshold ionization of ⟨Z⟩=17 is included. This work reveals how the ionization state and electron temperature of the isochorically heated nonequilibrium plasma are independently increased.
利用二维窄带X射线成像和X射线光谱技术,研究了高强度亚皮秒激光对薄钛箔的快速加热过程。使用一种调谐到4.51 keV钛Kα线的新型单色成像诊断方法,成功地观察到固体密度等离子体中一个显著电离的区域(平均原子序数⟨Z⟩>17±1),其横向直径约为35μm,深度为2μm。测量结果和二维碰撞粒子模拟表明,在强激光对固体箔的快速等容加热过程中,脉冲结束后几皮秒内,固体钛中的这种高电离态是通过热预等离子体的热扩散实现的。Kα线的位移和Kα线缺失的形成无法用现有的原子物理模型解释。只有当包含一个关于Kα线位移的唯象模型,且阈值电离平均原子序数⟨Z⟩ = 17时,才能重现测量得到的Kα图像。这项工作揭示了等容加热的非平衡等离子体的电离态和电子温度是如何独立增加的。