Marvel C J, Behler K D, LaSalvia J C, Domnich V, Haber R A, Watanabe M, Harmer M P
Department of Materials Science and Engineering, Lehigh University, Bethlehem, PA 18015, USA.
U.S. Army Combat Capabilities Development Command Army Research Laboratory, Weapons and Materials Research Directorate, Ceramic and Transparent Materials Branch, Aberdeen Proving Ground, MD 21005, USA; SURVICE Engineering, Belcamp, MD 21017, USA.
Ultramicroscopy. 2019 Jul;202:163-172. doi: 10.1016/j.ultramic.2019.04.008. Epub 2019 Apr 22.
Accurate quantification of light elements which produce only soft X-ray lines via X-ray energy dispersive spectrometry (XEDS) has been traditionally difficult due to poor X-ray emission and detector efficiencies at low energies and significant X-ray absorption effects. The ζ-factor microanalysis method enables one to correct for these shortcomings; however, ζ-factor microanalysis has not yet been thoroughly applied to inorganic materials which are entirely or mostly composed of light elements such as boron carbide, boron nitride, or boron suboxide. This work successfully extended ζ-factor microanalysis to boron-rich ceramics and accurately determined stoichiometries of multiple boron carbides and measured grain boundary compositions of a boron carbide mixed with additives consisting of rare-earth ions. Various strategies were employed to experimentally determine a full range of ζ-factors and measurements were validated using materials of known composition including silicon hexaboride and silicon carbide. Overall, this work has shown that XEDS is a viable technique for light element quantification in (scanning) transmission electron microscopy, in terms of both the accuracy and precision, which is comparable or superior to the complementary electron energy loss spectrometry.
传统上,通过X射线能量色散谱(XEDS)对仅产生软X射线谱线的轻元素进行准确定量一直很困难,这是因为在低能量下X射线发射和探测器效率较低,且存在显著的X射线吸收效应。ζ因子微分析方法能够校正这些缺点;然而,ζ因子微分析尚未被彻底应用于完全或主要由轻元素组成的无机材料,如碳化硼、氮化硼或氧化硼。这项工作成功地将ζ因子微分析扩展到富硼陶瓷,并准确测定了多种碳化硼的化学计量比,以及测量了与由稀土离子组成的添加剂混合的碳化硼的晶界成分。采用了各种策略来实验确定全范围的ζ因子,并使用包括六硼化硅和碳化硅在内的已知成分材料对测量结果进行了验证。总体而言,这项工作表明,就准确性和精密度而言,XEDS是(扫描)透射电子显微镜中用于轻元素定量的一种可行技术,其与互补的电子能量损失谱相当或更优。