Department of Radiology, The Alfred Hospital, Victoria, Australia.
Department of Pathology, The Alfred Hospital, Victoria, Australia.
Diagn Interv Radiol. 2019 Jul;25(4):304-309. doi: 10.5152/dir.2019.18361.
Irreversible electroporation (IRE) is a nonthermal tumor ablation technique that induces cell apoptosis while preserving extracellular architecture. Surgical clips and embolic agents may lie adjacent to, or within, the target lesion. It is unknown to date if IRE causes degradation to the embolic agents or surgical clips that may have adverse effects to patients. We aimed to examine the effects of the IRE on the morphology of various embolic agents and the effects of these agents to the ablation field using a previously validated vegetal model.
Metallic surgical clips and various metallic and nonmetallic embolic agents were inserted within the center of the tuber ablation field. Additionally, clips were inserted on the edge and outside the ablation field. One tuber was ablated as a control. Ablation settings were based on previous published experiments. Tubers were imaged with magnetic resonance imaging (MRI) 18-24 hours after ablation and the ablated field dimensions were measured. Nonmetallic embolic agents were examined microscopically by the pathologist.
Nonmetallic agents did not affect the ablation pattern. Metallic implants, however, caused arcing of the ablation margins. There was no macroscopic or microscopic degradation to the agents after IRE.
The ablation zone arced in the presence of surgical clips at the edge or outside the ablation margins; therefore, nearby critical structures may be susceptible to the effects of IRE. Furthermore, there was no physical degradation of the embolic agents or surgical clips, and this may have importance when considering IRE ablation of previously embolized lesions in vivo.
不可逆电穿孔(IRE)是一种非热肿瘤消融技术,它在保持细胞外结构的同时诱导细胞凋亡。手术夹和栓塞剂可能位于靶病变的附近或内部。目前尚不清楚 IRE 是否会导致栓塞剂或手术夹降解,从而对患者产生不良影响。我们旨在使用先前验证的植物模型来检查 IRE 对各种栓塞剂形态的影响,以及这些栓塞剂对消融区域的影响。
将金属手术夹和各种金属和非金属栓塞剂插入到消融区域的中心。此外,还将夹插入到消融区域的边缘和外部。一个结节作为对照进行消融。消融设置基于以前发表的实验。在消融后 18-24 小时,用磁共振成像(MRI)对结节进行成像,并测量消融区域的尺寸。病理学家对非金属栓塞剂进行显微镜检查。
非金属栓塞剂不会影响消融模式。然而,金属植入物导致消融边缘出现电弧。IRE 后,栓塞剂和手术夹没有出现宏观或微观降解。
在消融边缘或外部存在手术夹的情况下,消融区域会出现电弧;因此,附近的关键结构可能容易受到 IRE 的影响。此外,栓塞剂或手术夹没有发生物理降解,这在考虑体内先前栓塞病变的 IRE 消融时可能具有重要意义。