使用TEMPLO二维运动分析软件进行角度测量的评估者内和评估者间信度
Intrarater and Interrater Reliability of Angular Measures Using TEMPLO Two-dimensional Motion Analysis Software.
作者信息
Greisberger Andrea, Wolf Brigitte, Widhalm Klaus, Kollmitzer David, Arbesser Maximilian, Putz Peter
机构信息
Department of Health Sciences, FH Campus Wien, Vienna, Austria.
Department of Health Sciences, FH Campus Wien, Vienna, Austria.
出版信息
J Manipulative Physiol Ther. 2019 Jul;42(6):425-429. doi: 10.1016/j.jmpt.2018.11.018. Epub 2019 Jul 16.
OBJECTIVE
The purpose of this study was to assess the intrarater and interrater reliability of marking 2 angles with the TEMPLO software and to provide relevant information for clinical practice.
METHODS
A prospective test-retest study has been conducted. Four raters took measures on 2 days, with 2 weeks in between. Craniovertebral angle and trunk forward lean were drawn on 22 video frames using TEMPLO. Reliability was examined using intraclass correlation coefficients including standard errors of measurement and minimal detectable change values as measures of precision expressed in the unit of the test (°).
RESULTS
Intraclass correlation coefficients for intrarater and interrater reliability ranged from 0.98 to 1.00. Standard errors of measurement and minimal detectable change values ranged from 0.4° to 0.8° and 0.8° to 2.3°, respectively.
CONCLUSION
These results indicate excellent reliability for craniovertebral angle and trunk forward lean assessed with TEMPLO software. Changes exceeding 2.3° may be expected to fall outside the test's variability.
目的
本研究旨在评估使用TEMPLO软件标记两个角度时的评分者内和评分者间信度，并为临床实践提供相关信息。
方法
进行了一项前瞻性重测研究。四名评分者在两天内进行测量，中间间隔两周。使用TEMPLO在22个视频帧上绘制颅椎角和躯干前倾角度。使用组内相关系数进行信度检验，包括测量标准误差和最小可检测变化值，作为以测试单位（°）表示的精密度指标。
结果
评分者内和评分者间信度的组内相关系数范围为0.98至1.00。测量标准误差和最小可检测变化值分别为0.4°至0.8°和0.8°至2.3°。
结论
这些结果表明，使用TEMPLO软件评估颅椎角和躯干前倾角度具有出色的信度。超过2.3°的变化可能超出测试的变异性范围。
Zotero 插件