Suppr超能文献

利用沼气工艺产生的废二氧化碳和预处理的液体消化物在光生物反应器和开放池塘中培养三角褐指藻。

Use of waste carbon dioxide and pre-treated liquid digestate from biogas process for Phaeodactylum tricornutum cultivation in photobioreactors and open ponds.

机构信息

Department of Biological, Geological and Environmental Sciences (BiGeA), University of Bologna, Via S'Alberto 163, 48123 Ravenna, Italy.

Department of Biological, Geological and Environmental Sciences (BiGeA), University of Bologna, Via S'Alberto 163, 48123 Ravenna, Italy.

出版信息

Bioresour Technol. 2019 Nov;292:121921. doi: 10.1016/j.biortech.2019.121921. Epub 2019 Jul 27.

Abstract

Phaeodactylum tricornutum is considered a promising source of polyunsaturated fatty acids (PUFAs), in particular eicosapentaenoic acid (EPA). In this study, P. tricornutum cultivation using waste products from anaerobic digestion (i.e. liquid digestate and CO) was tested and scaled-up in closed and open prototype systems. The chemical composition of algal biomass was evaluated to optimize the lipid content. Algal productivity and composition, especially in terms of PUFAs, were not modified by the use of waste CO. Digestate led to a lower protein (24%) content than medium (36-37%), without affecting lipid amount (about 37%). Algal and EPA productivity were nearly two-fold higher by using photobioreactors (0.075 g biomass L day and 1.62 mg EPA g day) than open ponds, which are more influenced by environmental conditions. This study highlights that economic and environmental benefits could be achieved by using waste CO and liquid digestate from anaerobic digestion for microalgae cultivation.

摘要

三角褐指藻被认为是多不饱和脂肪酸(PUFAs)的有前途的来源,特别是二十碳五烯酸(EPA)。在这项研究中,使用厌氧消化(即液体消化物和 CO)的废物来测试和放大三角褐指藻的培养,在封闭和开放的原型系统中进行。评估藻类生物质的化学成分以优化脂质含量。藻类的生产力和组成,特别是在多不饱和脂肪酸方面,不受废物 CO 的使用影响。与培养基(36-37%)相比,消化物的蛋白质含量(24%)较低,但不影响脂质量(约 37%)。使用光生物反应器(0.075g 生物质 L 天和 1.62mg EPA g 天)比开放池塘的藻类和 EPA 生产力高近两倍,因为开放池塘更容易受到环境条件的影响。本研究强调,通过使用厌氧消化产生的废 CO 和液体消化物来培养微藻,可以实现经济和环境效益。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验