Ignatchenko Alexey V, DiProspero Thomas J, Patel Heni, LaPenna Joseph R
Chemistry Department, St. John Fisher College, 3690 East Avenue, Rochester, New York 14618, United States.
ACS Omega. 2019 Jun 25;4(6):11032-11043. doi: 10.1021/acsomega.9b01188. eCollection 2019 Jun 30.
Acetone is the expected ketone product of an acetic acid decarboxylative ketonization reaction with metal oxide catalysts used in the industrial production of ketones and for biofuel upgrade. Decarboxylative cross-ketonization of a mixture of acetic and isobutyric acids yields highly valued unsymmetrical methyl isopropyl ketone (MIPK) along with two less valuable symmetrical ketones, acetone and diisopropyl ketone (DIPK). We describe a side reaction of isobutyric acid with acetone yielding the cross-ketone MIPK with monoclinic zirconia and anatase titania catalysts in the absence of acetic acid. We call it a reketonization reaction because acetone is deconstructed and used for the construction of MIPK. Isotopic labeling of the isobutyric acid's carboxyl group shows that it is the exclusive supplier of the carbonyl group of MIPK, while acetone provides only methyl group for MIPK construction. More branched ketones, MIPK or DIPK, are less reactive in their reketonization with carboxylic acids. The proposed mechanism of reketonization supported by density functional theory (DFT) computations starts with acetone enolization and proceeds via its condensation with surface isobutyrate to a β-diketone similar to β-keto acid formation in the decarboxylative ketonization of acids. Decomposition of unsymmetrical β-diketones with water (or methanol) by the retrocondensation reaction under the same conditions over metal oxides yields two pairs of ketones and acids (or esters in the case of methanol) and proceeds much faster compared to their formation. The major direction yields thermodynamically more stable products-more substituted ketones. DFT calculations predict even a larger fraction of the thermodynamically preferred pair of products. The difference is explained by some degree of a kinetic control in the opposite direction. Reketonization has lower reaction rates compared to regular ketonization. Still, a high extent of reketonization occurs unnoticeably during the decarboxylative ketonization of acetic acid as the result of the acetone reaction with acetic acid. This degenerate reaction is the major cause of the inhibition by acetone of its own rate of formation from acetic acid at high conversions.
丙酮是乙酸脱羧酮化反应预期生成的酮产物,该反应采用金属氧化物催化剂,用于工业生产酮类以及生物燃料升级。乙酸和异丁酸混合物的脱羧交叉酮化反应会生成高价值的不对称甲基异丙基酮(MIPK)以及两种价值较低的对称酮,即丙酮和二异丙基酮(DIPK)。我们描述了在没有乙酸的情况下,异丁酸与丙酮发生的副反应,该反应在单斜氧化锆和锐钛矿型二氧化钛催化剂作用下生成交叉酮MIPK。我们将其称为再酮化反应,因为丙酮被解构并用于构建MIPK。异丁酸羧基的同位素标记表明,它是MIPK羰基的唯一供应者,而丙酮仅为MIPK的构建提供甲基。支链更多的酮,如MIPK或DIPK,在与羧酸的再酮化反应中活性较低。密度泛函理论(DFT)计算支持的再酮化反应机理始于丙酮的烯醇化,然后通过其与表面异丁酸盐缩合生成β-二酮,类似于酸的脱羧酮化反应中β-酮酸的形成。在相同条件下,不对称β-二酮在金属氧化物上通过逆缩合反应与水(或甲醇)分解生成两对酮和酸(如果是甲醇则生成酯),并且其分解速度比形成速度快得多。主要方向生成热力学上更稳定的产物——取代度更高的酮。DFT计算预测热力学上更优的产物对的比例甚至更大。这种差异可以通过相反方向的某种程度的动力学控制来解释。与常规酮化反应相比,再酮化反应速率较低。尽管如此,由于丙酮与乙酸反应,在乙酸脱羧酮化过程中仍会不可察觉地发生高度的再酮化反应。这种简并反应是在高转化率下丙酮抑制其自身由乙酸形成速率的主要原因。