Orthopedic Department, Assiut University Hospital, Assiut, Egypt.
Burjeel Hospital for Advanced Surgery, Dubai, UAE.
Knee Surg Sports Traumatol Arthrosc. 2020 Sep;28(9):2948-2952. doi: 10.1007/s00167-019-05695-w. Epub 2019 Sep 3.
Stiffness is a common problem following total knee arthroplasty (TKA). Mal-rotated components have been claimed to be the major cause of pain and limited motion after TKA. The present study investigates whether intra-operative intentional malrotation of the tibial component would change in vivo kinematics. The hypothesis is excessive internal rotation of the tibial component would result in postoperative extension deficit.
Thirty-one patients were enrolled in this study. After completing bony cuts and proper soft tissue balancing, the femoral and tibial trials were impacted and fixed using small pins. Lateral radiographs were used to measure and compare intraoperative full knee extension during normal and after intentional internal rotation of the tibial component. The extension deficit angles were also compared between the posterior stabilised (PS) and cruciate retaining (CR) implants.
For normal tibial component rotation, the median (interquartile range) extension deficit was 0° (4). The mean tibial trial intentional internal rotation was 21.2° (± 4.5). The median (interquartile range) extension deficit significantly increased to 6° (4) after tibial component internal rotation (p = 0.001). The use of PS spacers resulted in a significantly greater extension deficit after intentional internal rotation 9° (5) compared to that of the CR implant 1° (4) (p = 0.001).
Internal rotation of the tibial component in total knee arthroplasty can lead to postoperative extension deficit. This could be attributed to interference with "screw home" mechanism that requires full external rotation of the tibia on the femur. Consequently, this deficit may cause pain and knee stiffness following TKA.
III.
膝关节置换术后僵硬是一种常见问题。有人认为,旋转不良的部件是膝关节置换术后疼痛和活动受限的主要原因。本研究旨在探讨膝关节置换术中胫骨组件的蓄意旋转是否会改变体内运动学。假设是胫骨组件过度内旋会导致术后伸展不足。
本研究纳入了 31 名患者。完成截骨和适当的软组织平衡后,股骨和胫骨试模被打入并使用小钉固定。侧位 X 线片用于测量和比较正常情况下和胫骨组件蓄意内旋后术中全膝关节伸展度。还比较了后稳定型(PS)和前交叉韧带保留型(CR)植入物之间的伸展不足角度。
对于正常的胫骨组件旋转,中位数(四分位距)伸展不足为 0°(4)。胫骨试模蓄意内旋的平均角度为 21.2°(± 4.5)。胫骨组件内旋后,中位数(四分位距)伸展不足显著增加至 6°(4)(p = 0.001)。与 CR 植入物 1°(4)相比,PS 间隔物在胫骨组件蓄意内旋后导致的伸展不足明显更大,为 9°(5)(p = 0.001)。
膝关节置换术中胫骨组件的内旋可导致术后伸展不足。这可能归因于“螺钉归位”机制的干扰,该机制要求胫骨在股骨上完全外旋。因此,这种不足可能会导致膝关节置换术后疼痛和膝关节僵硬。
III 级。