Additive manufacturing of resonant fluidic sensors based on photonic bandgap waveguides for terahertz applications.

A hollow-core Bragg waveguide-based resonant fluidic sensor operating in the terahertz frequency band is studied. A fused deposition modeling 3D printing technique with a Polylactic Acid filament is employed to fabricate the sensor where the liquid analyte is flowing in the microfluidic channel integrated into the waveguide cladding. The fluidic channel supports a resonant defect state which is probed spectrally using the core-guided mode of the Bragg waveguide. Continuous-wave terahertz spectroscopy is used to characterize the fluidic sensor. The measured signal amplitude shows a dip in the transmission spectrum, while the measured phase shows a sharp change in the vicinity of the anticrossing frequency whose spectral position depends strongly on the real part of the analyte refractive index. The sensor spectral response is further optimized by tailoring the waveguide length and position of the defect layer. Consistent with the results of numerical modeling, the measured sensor sensitivity is ~110 GHz/RIU, while the sensor resolution ~0.0045 RIU is limited by the parasitic standing waves in the spectrometer cavity. We believe that the proposed fluidic sensor opens new opportunities in applied chemical and biological sensing as it offers a non-contact measurement technique for monitoring refractive index changes in flowing liquids.