Department of Cardiology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Ulmenweg 18, 91054 Erlangen, Germany.
Eur J Radiol. 2019 Dec;121:108732. doi: 10.1016/j.ejrad.2019.108732. Epub 2019 Nov 1.
While computed tomography (CT) is frequently used to quantify epicardial adipose tissue (EAT), the effect of different acquisition parameters on EAT volume has not been systematically reported. We assessed the influence of low-voltage acquisition and contrast enhancement on EAT quantification.
Two independent cohorts (100 and 127 patients) referred for routine coronary CT were included. One cohort received a low-voltage and a standard voltage non-contrast acquisition (120 and 100 kV), the other cohort underwent non-contrast and contrast-enhanced CT. EAT volume was quantified using a semi-automated analysis software. Whereas the lower EAT threshold was consistently set at -190 Hounsfield Units (HU), different upper thresholds for EAT were analyzed. Bland-Altman analysis was used to analyze the agreement of EAT volume between scans with different acquisition parameters. We referred to a non-enhanced 120 kV acquisition with an upper threshold of -30 HU.
Mean EAT volume was 159 ± 76 ml as measured in 120 kV non-contrast data sets with an upper threshold of -30 HU. For 100 kV data sets, an upper threshold of -40 HU showed the best correlation (r = 0.961, p < 0.05). Significant overestimation was found for upper thresholds of -20 and -30 HU and significant underestimation for -50 HU. In non-contrast vs. contrast-enhanced acquisitions, there was a significant underestimation of EAT volume for contrast-enhanced scans (mean difference 31 ml, 95% limits of agreement 27 to -89 ml).
CT-based EAT volume quantification in low-voltage and contrast-enhanced images is feasible. However, adjustment of the upper threshold for detection of fat is mandatory.
虽然计算机断层扫描(CT)常用于量化心外膜脂肪组织(EAT),但不同采集参数对 EAT 体积的影响尚未系统报道。我们评估了低电压采集和对比增强对 EAT 定量的影响。
纳入了两个独立的队列(100 例和 127 例患者),这些患者因常规冠状动脉 CT 而就诊。一组患者接受了低电压和标准电压非对比采集(120kV 和 100kV),另一组患者接受了非对比和对比增强 CT。使用半自动分析软件定量 EAT 体积。虽然始终将较低的 EAT 阈值设置为-190 亨氏单位(HU),但分析了不同的 EAT 上限阈值。Bland-Altman 分析用于分析具有不同采集参数的扫描之间 EAT 体积的一致性。我们参考了具有-30HU 上限阈值的非增强 120kV 采集。
在具有-30 HU 上限阈值的 120kV 非对比数据集测量的 EAT 体积平均为 159±76ml。对于 100kV 数据集,-40 HU 的上限阈值显示出最佳相关性(r=0.961,p<0.05)。-20 和-30 HU 的上限阈值存在明显高估,-50 HU 的上限阈值存在明显低估。在非对比与对比增强采集之间,对比增强扫描存在 EAT 体积的明显低估(平均差异 31ml,95%一致性界限为 27 至-89ml)。
在低电压和对比增强图像中基于 CT 的 EAT 体积定量是可行的。然而,必须调整脂肪检测的上限阈值。