Dataset showing thermal conductivity of South-Eastern Nigerian kaolinite clay admixtures with sawdust and iron filings for fired-bricks production.

In this dataset, the influence of admixture of sawdust and iron filings on the kaolinite clay was experimented. This was done by blending various samples of kaolinite clay with varying percentages of sawdust and iron filings. Thermal analysis of the clay samples was carried out at different ratios of sawdust and iron filings blended with the clay samples. The blended ratio of sawdust and iron fillings ranges from 0%, 5%, 10%, 20%, 30%-40%. These samples were fired in a local kiln that achieved temperature of 900 °C - 1200 °C to burn-off the sawdust consequently creating pores/cavities where the sawdust had been burnt and to fuse the iron particles with the clay material. The experimental data on the thermal characteristics and refractory properties of the clay sample were then acquired. The data were acquired, processed and presented. Thermocouple and thermometer were used to acquire the temperature during the firing of the bricks. Finally, thermal conductivities and bulk densities of the samples were computed following an established standard.