Late Stage Pharmaceutical and Processing Development, Pharmaceutical Development & Supplies, Pharma Technical Development Biologics EU, F. Hoffmann-La Roche Ltd., Basel 4070, Switzerland; Division of Pharmaceutical Technology, Department of Pharmaceutical Sciences, University of Basel, Basel 4056, Switzerland.
Late Stage Pharmaceutical and Processing Development, Pharmaceutical Development & Supplies, Pharma Technical Development Biologics EU, F. Hoffmann-La Roche Ltd., Basel 4070, Switzerland.
Eur J Pharm Biopharm. 2020 Feb;147:45-56. doi: 10.1016/j.ejpb.2019.12.010. Epub 2019 Dec 19.
Freeze-drying is commonly used to improve stability of liquid formulations of labile biopharmaceuticals. Lyo- and cryoprotectants such as sucrose are traditionally utilized as excipients, but have low glass transition (T') and collapse temperatures (T). Consequently, these formulations require low primary drying temperatures making the lyophilization cycle time-consuming and costly. We investigated different dextrans (1, 40, 150, and 500 kDa) and mixtures of dextran with sucrose as alternative excipients. The influence of dextran on thermal properties, cake appearance, and other quality attributes in the solid state was studied using bovine serum albumin as model protein. Especially at higher weight ratios of dextran to sucrose, dextrans of medium to high molecular weight (M) of 40-500 kDa showed up to 20 °C higher T compared to sucrose, which was reflected in elegant lyophilisates. However, this resulted in slower reconstitution times. Addition of dextran led to lower residual moisture levels and higher T values compared to sucrose We confirmed the thermal properties for two monoclonal antibodies (mAb) at two weight ratios of sucrose and dextran with different M, and tested for stability at 40 °C for 14 days. While no loss in relative potency of the antibodies was observed after storage, size exclusion chromatography and isoelectric focusing revealed a strong increase in high molecular weight species (HMWs) and acidic species, which were dependent on the M of the dextrans. With further characterization of selected formulations (dextran 1 kDa) by boronate affinity chromatography and mass spectrometry analysis, we demonstrated that HMWs were a result of glycation by free terminal glucose of the dextran. This chemical modification was strongly reduced when adding sucrose, which protects the protein possibly by shielding its surface. Our results demonstrate that formulation scientists need to use dextrans as excipients in freeze-dried mAb formulations with caution. A binary mixture of sucrose and dextran in adequate ratio however might potentially be superior to pure sucrose formulations allowing for faster freeze-drying cycles resulting in elegant lyophilisates and good protein stability.
冷冻干燥通常用于提高不稳定生物制药的液体制剂的稳定性。传统上,蔗糖等冷冻保护剂和赋形剂用于提高玻璃化转变温度(Tg)和塌陷温度(Tc)。然而,这些制剂需要较低的初级干燥温度,使得冷冻干燥周期耗时且成本高。我们研究了不同的葡聚糖(1、40、150 和 500 kDa)以及葡聚糖与蔗糖的混合物作为替代赋形剂。使用牛血清白蛋白作为模型蛋白,研究了葡聚糖对固体状态下热特性、蛋糕外观和其他质量属性的影响。特别是在较高的葡聚糖与蔗糖重量比下,中分子量(M)至高分子量(M)为 40-500 kDa 的葡聚糖的 Tg 比蔗糖高 20°C,这反映在精致的冻干物中。然而,这导致复溶时间变慢。与蔗糖相比,添加葡聚糖会导致更低的残留水分水平和更高的 T 值。我们在两个蔗糖和葡聚糖重量比下,用两种不同 M 的两种单克隆抗体(mAb)确认了热性能,并在 40°C 下进行了 14 天的稳定性测试。尽管在储存后没有观察到抗体的相对效价损失,但尺寸排阻色谱和等电聚焦显示,高分子量物质(HMWs)和酸性物质的含量显著增加,这取决于葡聚糖的 M。通过硼酸盐亲和色谱和质谱分析对选定制剂(1 kDa 葡聚糖)进行进一步表征,我们证明 HMWs 是葡聚糖游离末端葡萄糖糖化的结果。当添加蔗糖时,这种化学修饰会大大减少,蔗糖可能通过屏蔽其表面来保护蛋白质。我们的结果表明,制剂科学家在冷冻干燥 mAb 制剂中使用葡聚糖作为赋形剂时需要谨慎。然而,蔗糖和葡聚糖的二元混合物在适当的比例下可能具有优势,能够实现更快的冷冻干燥循环,产生精致的冻干物和良好的蛋白质稳定性。