Quattrosoldi Silvia, Androsch René, Janke Andreas, Soccio Michelina, Lotti Nadia
Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Via Terracini 28, 40131 Bologna, Italy.
Interdisciplinary Center for Transfer-Oriented Research in Natural Sciences (IWE TFN), Martin Luther University Halle-Wittenberg, 06099 Halle/Saale, Germany.
Polymers (Basel). 2020 Jan 18;12(1):235. doi: 10.3390/polym12010235.
The crystallization behavior of fully biobased poly(butylene isophthalate) (PBI) has been investigated using calorimetric and microscopic techniques. PBI is an extremely slow crystallizing polymer that leads, after melt-crystallization, to the formation of lamellar crystals and rather large spherulites, due to the low nuclei density. Based upon quantitative analysis of the crystal-nucleation behavior at low temperatures near the glass transition, using Tammann's two-stage nuclei development method, a nucleation pathway for an acceleration of the crystallization process and for tailoring the semicrystalline morphology is provided. Low-temperature annealing close to the glass transition temperature () leads to the formation of crystal nuclei, which grow to crystals at higher temperatures, and yield a much finer spherulitic superstructure, as obtained after direct melt-crystallization. Similarly to other slowly crystallizing polymers like poly(ethylene terephthalate) or poly(l-lactic acid), low-temperature crystal-nuclei formation at a timescale of hours/days is still too slow to allow non-spherulitic crystallization. The interplay between glass relaxation and crystal nucleation at temperatures slightly below is discussed.
采用量热法和显微镜技术研究了全生物基聚间苯二甲酸丁二醇酯(PBI)的结晶行为。PBI是一种结晶极其缓慢的聚合物,由于其成核密度低,在熔融结晶后会形成片晶和相当大的球晶。基于利用塔曼两阶段成核发展方法对玻璃化转变温度附近低温下的结晶成核行为进行的定量分析,提供了一种加速结晶过程和调整半结晶形态的成核途径。接近玻璃化转变温度()的低温退火会导致晶核形成,这些晶核在较高温度下生长成晶体,并产生比直接熔融结晶后得到的更为精细的球晶超结构。与其他结晶缓慢的聚合物如聚对苯二甲酸乙二酯或聚(L-乳酸)类似,在数小时/数天时间尺度上的低温晶核形成仍然太慢,无法实现非球晶结晶。讨论了在略低于该温度时玻璃松弛与晶核形成之间的相互作用。