Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong; Department of Electromechanical Engineering, University of Macau, Taipa, Macau.
Department of Applied Biology and Chemical Technology, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong.
Chemosphere. 2020 Jun;249:126086. doi: 10.1016/j.chemosphere.2020.126086. Epub 2020 Feb 5.
The present experimental study aims to examine the impacts of various fueling modes of operation on the particle-phase polycyclic aromatic hydrocarbons (PAHs) and n-alkanes (C16-C30), and volatility and oxidation reactivity of particulate matter (PM) emitted from a diesel engine fueled with a ternary fuel (80% diesel, 5% biodiesel and 15% ethanol (D80B5E15, volume %)) under four engine operating conditions. Four fueling modes, including diesel, blended, fumigation and combined fumigation + blended (F + B) modes were tested using pure diesel fuel for diesel mode and a constant fuel content of D80B5E15 for the blended, fumigation and F + B modes to create the same condition for comparing their impacts on the parameters investigated. The average results illustrate that both blended and fumigation modes can reduce the PAHs (-78.4% and -31.3%), benzo[a]pyrene equivalent (-81.7% and -38.9%), n-alkanes (-46.5% and -21.5%) and non-volatile substance fraction (-25.1% and -11.1%), but increase the high-volatile substance fraction (12.8% and 6.9%) and oxidation reactivity rate (34.0% and 4.9%), respectively compared to those of the diesel mode. While the effect of the blended mode on the parameters investigated is stronger than the fumigation mode. And the F + B mode has the effects in between the results of the blended and fumigation modes.
本实验研究旨在考察四种发动机运行模式(柴油模式、掺烧模式、汽化模式和掺烧+汽化混合模式)对以 80%柴油、5%生物柴油和 15%乙醇的三元燃料(D80B5E15,体积%)为燃料的柴油机排放颗粒物中颗粒相多环芳烃(PAHs)和正构烷烃(C16-C30)、颗粒物挥发性和氧化反应活性的影响。使用纯柴油作为柴油模式的燃料,D80B5E15 燃料的恒定燃料含量作为掺烧、汽化和 F+B 模式的燃料,以创造相同的条件来比较它们对所研究参数的影响。平均结果表明,掺烧和汽化模式均可降低 PAHs(-78.4%和-31.3%)、苯并[a]芘等效物(-81.7%和-38.9%)、正构烷烃(-46.5%和-21.5%)和非挥发性物质分数(-25.1%和-11.1%),但与柴油模式相比,分别增加了高挥发性物质分数(12.8%和 6.9%)和氧化反应活性速率(34.0%和 4.9%)。而掺烧模式对所研究参数的影响强于汽化模式,F+B 模式的效果介于掺烧模式和汽化模式之间。