Laboratory of Biological Oceanography, Stazione Zoologica "A. Dohrn", Villa Comunale, 80121, Naples, Italy.
Bioprocess Engineering, AlgaePARC, Wageningen University and Research, PO Box 16, 6700 AA, Wageningen, The Netherlands.
Appl Microbiol Biotechnol. 2020 Apr;104(7):3109-3119. doi: 10.1007/s00253-020-10383-8. Epub 2020 Feb 14.
The extremophile red alga Galdieria sulphuraria was successfully grown immobilized in a twin-layer porous substrate bioreactor (TL-PSBR). A maximal biomass growth rate of 10 g dry weight m day was measured at a photon fluence rate of 200 μmol photons m s with addition of 1% CO and a temperature of 34 °C. Under these conditions, a maximal biomass value of 232 g m was attained after 33 days of growth. Phycobilin productivity, however, was highest at a lower photon fluence rate of 100 μmol photons m s and reached a phycobilin value of 14 g m, a phycobilin content in the biomass of 63 mg g and a phycobilin growth rate of 0.28 g m day for phycocyanin and 0.23 g m day for allophycocyanin. Addition of CO was essential to enhance growth and phycobilin production in G. sulphuraria and further optimization of the cultivation process in the TL-PSBR appears possible using a multi-phase approach, higher growth temperatures and optimization of nutrient supply. It is concluded that autotrophic cultivation of G. sulphuraria in a TL-PSBR is an attractive alternative to suspension cultivation for phycobilin production and applications in bioremediation.
嗜热红藻 Galdieria sulphuraria 成功地固定在双层多孔基质生物反应器(TL-PSBR)中生长。在添加 1%CO 和 34°C 的条件下,当光量子通量率为 200 μmol 光子 m s 时,测量到最大生物量增长率为 10 g 干重 m d。在此条件下,经过 33 天的生长,达到了 232 g m 的最大生物量值。然而,藻胆蛋白的生产力在较低的光量子通量率 100 μmol 光子 m s 下最高,达到了 14 g m 的藻胆蛋白值、生物量中藻胆蛋白含量为 63 mg g 和藻胆蛋白生长速率为 0.28 g m d 用于藻蓝蛋白和 0.23 g m d 用于别藻蓝蛋白。添加 CO 对于增强 G. sulphuraria 的生长和藻胆蛋白生产是必不可少的,并且使用多相方法、更高的生长温度和优化养分供应,似乎可以进一步优化 TL-PSBR 中的培养过程。结论是,在 TL-PSBR 中进行 G. sulphuraria 的自养培养是藻胆蛋白生产和生物修复应用中悬浮培养的有吸引力的替代方法。