Chemical and Biomedical Engineering Department, Florida Agricultural and Mechanical University-Florida State University College of Engineering, 2525 Pottsdamer Street, Tallahassee, Florida 32310, United States.
Aero-Propulsion, Mechatronics & Energy Center, Florida State University, 2003 Levy Avenue, Tallahassee, Florida 32310, United States.
J Phys Chem B. 2020 Mar 12;124(10):2040-2047. doi: 10.1021/acs.jpcb.9b11446. Epub 2020 Mar 3.
The diffusion of a lithium salt through a diblock copolymer electrolyte was studied using vibrational spectroscopy. Lithium bis-trifluoromethylsulfonimide (LiTFSI) was dissolved in a lamellar-structured, high-molecular-weight polystyrene-poly(ethylene oxide) diblock copolymer at various concentrations (0-4.51 mol/kg). The diffusion coefficient of LiTFSI was determined from time-resolved Fourier Transform infrared spectroscopy attenuated total reflectance (FTIR-ATR) as a function of the salt concentration. By the application of the Beer-Lambert law, FTIR-ATR was used to detect concentration changes. Mutual diffusion was driven by putting in contact two polymer electrolyte membranes with different salt concentrations. Thus, mutual diffusion coefficients were obtained without the influence of electric fields or electrode interfaces. The accuracy of the simple experimental approach and straightforward analysis was validated by comparison to diffusion coefficients reported from measurements in electrochemical cells. Both methods yield mutual diffusion coefficients of lithium salt that are only weakly (and nonmonotonically) dependent on salt concentration. There is some indication in the spectra that there exist two populations of salt with different dissociation states. This could explain the observed nonmonotonic concentration dependence of the mutual diffusion coefficient of the salt. This hypothesis will be examined quantitatively with complementary measurements in future work.
采用振动光谱法研究了通过嵌段共聚物电解质的锂盐扩散。将双三氟甲烷磺酰亚胺锂(LiTFSI)溶解在层状结构、高分子量聚苯乙烯-聚(氧化乙烯)嵌段共聚物中,浓度为 0-4.51mol/kg。通过时间分辨傅里叶变换红外光谱衰减全反射(FTIR-ATR)作为盐浓度的函数来确定 LiTFSI 的扩散系数。通过比尔-朗伯定律的应用,FTIR-ATR 用于检测浓度变化。通过将具有不同盐浓度的两个聚合物电解质膜接触,实现了相互扩散。因此,获得了相互扩散系数,而不受电场或电极界面的影响。通过与电化学电池测量报告的扩散系数进行比较,验证了简单实验方法和直接分析的准确性。这两种方法都得到了锂盐的相互扩散系数,它们仅与盐浓度弱(且非单调)相关。在光谱中存在两种具有不同离解状态的盐的可能性。这可以解释观察到的盐的相互扩散系数的非单调浓度依赖性。在未来的工作中,将通过补充测量对该假设进行定量检验。