Department of Life Science and Biotechnology, Jadavpur University, 188,Raja S.C. Mallick Road, Kolkata, 700032, India.
Division of Biology, Kansas State University, Manhattan, KS, USA.
Ecotoxicol Environ Saf. 2020 Jun 1;195:110439. doi: 10.1016/j.ecoenv.2020.110439. Epub 2020 Mar 14.
The ability of P. laurentii strain RY1 to remediate lead (Pb) from water was investigated in batch and column studies. The lead removal ability of non-viable biomass, non-viable biomass immobilised on agar-agar (biobeads) and agar-agar at different pH was compared in batch studies. It was found that among the three, biobeads have maximum ability to remove Pb followed by biomass and agar-agar beads. Maximum and almost equal lead removal by biobeads was observed at both neutral and alkaline pH making it a novel and more applicable bioremediator as all other reported bioremediators have a single pH for optimum activity. Studies were performed to determine the optimum conditions for lead removal from aqueous solutions for biobeads. The physical and chemical characterization of the biobeads before and after Pb biosorption was done by using S.E.M. and F.T.I.R. respectively. The adsorption of Pb on biobeads obeyed the Langmuir adsorption isotherm and pseudo first order kinetics. These mean that the Pb binding sites are identical, located on the surface of the adsorbant and the rate of Pb removal from aqueous solution is directly proportional to the number of Pb binding sites on the biobeads. The thermodynamics of the biosorption process is also investigated. The binding capacity of the biobeads in batch study was found to be 52.91mg/gm which is higher in comparison to other reported yeast bioremediators. The used biobeads can be desorbed using 0.1(M) CaCl. The desorbed biobeads can be used subsequently for several cycles of lead removal making it cost-effective. Column studies were also performed for biobeads with the help of Thomas model for examining its suitability for industrial application. Maximum specific lead uptake of the biobeads when applied in the column was found to be 58.26mg/gm which being promising makes it suitable for application in industries involved in the treatment of wastewater contaminated with high amounts of lead. The high mass transfer co-efficient indicate that small sized column can be used effectively to remove high amounts of lead which makes the bioremediation process by the biobeads more economical and advantageous for industrial application. Several factors like effectiveness of the biobeads in Pbremoval at both neutral and alkaline pH, reusability, high mass transfer co-efficient, regenerability and high binding capacity makes it a novel versatile, cost-effective and high utility bioremediator.
RY1 菌株对水中铅的修复能力在批处理和柱研究中进行了研究。在批处理研究中,比较了非活性生物量、琼脂琼脂固定的非活性生物量(生物珠)和不同 pH 值下的琼脂琼脂对铅的去除能力。结果表明,在这三种材料中,生物珠具有最大的铅去除能力,其次是生物量和琼脂珠。在中性和碱性 pH 值下,生物珠对铅的去除效果几乎相等,这使其成为一种新型、更适用的生物修复剂,因为所有其他报道的生物修复剂都只有一个最佳活性 pH 值。进行了研究以确定生物珠从水溶液中去除铅的最佳条件。使用 S.E.M. 和 F.T.I.R. 分别对生物珠进行了 Pb 生物吸附前后的物理化学特性表征。Pb 在生物珠上的吸附符合 Langmuir 吸附等温线和伪一级动力学。这意味着 Pb 结合位点相同,位于吸附剂的表面,并且 Pb 从水溶液中的去除速率与生物珠上的 Pb 结合位点数量直接成正比。还研究了生物吸附过程的热力学。在批处理研究中发现,生物珠的结合容量为 52.91mg/gm,高于其他报道的酵母生物修复剂。用过的生物珠可以用 0.1(M)CaCl 洗脱。洗脱后的生物珠可以随后用于几个铅去除循环,使其具有成本效益。还使用 Thomas 模型进行了生物珠的柱研究,以检查其在工业应用中的适用性。当在柱中应用时,生物珠的最大比铅吸收量为 58.26mg/gm,这是有希望的,使其适用于处理含有高浓度铅的废水的工业应用。高传质系数表明,小尺寸的柱子可以有效地去除大量的铅,这使得生物珠的生物修复过程在经济上更有利,更适合工业应用。生物珠在中性和碱性 pH 值下去除铅的有效性、可重复使用性、高传质系数、可再生性和高结合能力等因素使其成为一种新型、通用、经济高效且具有高应用价值的生物修复剂。