Caro C Angie D, Sampayo R Sandrith P, Acevedo C Diofanor, Montero C Piedad, Martelo Raúl J
Faculty of Engineering, Food Engineering Program, Research Group in Agricultural and Agro-Industrial Innovation and Development, University of Cartagena, Colombia.
Faculty of Economic Sciences, Tourism Administration Program, Research Group in Agricultural and Agro-Industrial Innovation and Development, University of Cartagena, Colombia.
Int J Food Sci. 2020 Mar 10;2020:9816204. doi: 10.1155/2020/9816204. eCollection 2020.
This study is aimed at analysing the effect of vacuum frying on the kinetic parameters of mass transfer, the CIE colour parameters of the Carimañola. For the kinetic analysis, the moisture and oil content were measured by means of an experimental design consisting of two factors: frying time with seven levels (60, 120, 180, 240, 300, 420, and 540 s) and frying temperature with three levels (120, 130, and 140°C). The diffusivity coefficient, the moisture transfer rate, and the oil adsorption rate, with their respective activation energies, were calculated. For the colour analysis, the reflectance technique was used to determine the colour coordinates of the CIE space, and the general colour change was calculated (Δ). Concerning the kinetics, the increase in temperature and frying time reduced the moisture content, while the oil content decreased with the increase in temperature and increases with frying time. The diffusivity ranged from 1, 238 × 10 m/s at 120°C to 2, 84 × 10 m/s at 140°C. The mass transfer coefficients for moisture ranged from 2 × 10 m/s at 120°C to 4 × 10 m/s at 140°C. The values of the oil uptake rate were from 0.0022 s at 120°C to 0.0018 s at 140°C. Finally, the luminosity parameter shows a decrease with the increase in temperature, although the first 240 s shows a rise and then begins to decrease. Vacuum frying allowed Carimañolas to be obtained with a lower oil and moisture content, with an appropriate colouring, eye-catching and visually attractive to consumers.
本研究旨在分析真空油炸对Carimañola的传质动力学参数及CIE颜色参数的影响。对于动力学分析,通过由两个因素组成的实验设计来测量水分和油含量:油炸时间有七个水平(60、120、180、240、300、420和540秒),油炸温度有三个水平(120、130和140°C)。计算了扩散系数、水分转移速率和油吸附速率及其各自的活化能。对于颜色分析,使用反射技术确定CIE空间的颜色坐标,并计算总体颜色变化(Δ)。关于动力学,温度和油炸时间的增加降低了水分含量,而油含量随温度升高而降低,随油炸时间增加而增加。扩散系数在120°C时为1.238×10⁻⁸m²/s至140°C时为2.84×10⁻⁸m²/s。水分的传质系数在120°C时为2×10⁻⁹m/s至140°C时为4×10⁻⁹m/s。油吸收速率的值在120°C时为0.0022/s至140°C时为0.0018/s。最后,明度参数随温度升高而降低,尽管在前240秒呈现上升然后开始下降。真空油炸使得获得的Carimañola具有较低的油和水分含量,有着合适的色泽,对消费者具有吸引力且在视觉上引人注目。