High-Throughput Stamping of Hybrid Functional Surfaces.

Hydrophobic-hydrophilic hybrid surfaces, sometimes termed biphilic surfaces, have shown potential to enhance condensation and boiling heat transfer, anti-icing, and fog harvesting performance. However, state of art techniques to develop these surfaces have limited substrate selection, poor scalability, and lengthy and costly fabrication methods. Here, we develop a simple, scalable, and rapid stamping technique for hybrid surfaces with spatially controlled wettability. To enable stamping, rationally designed and prefabricated stamps, which are reusable and independent of the substrate and functional coating, were used. To demonstrate the stamping technique, we used silicon wafer, copper, and aluminum substrates functionalized with a variety of hydrophobic chemistries including heptadecafluorodecyltrimethoxy-silane, octafluorocyclobutane, and slippery omniphobic covalently attached liquids. Condensation experiments and microgoniometric characterization demonstrated that the stamped surfaces have global hydrophobicity or superhydrophobicity with localized hydrophilicity (spots) enabled by local removal of the functional coating during stamping. Stamped surfaces with superhydrophobic backgrounds and hydrophilic spots demonstrated stable coalescence induced droplet jumping. Compared to conventional techniques, our stamping method has comparable prototyping cost with reduced manufacturing time scale and cost. Our work not only presents design guidelines for the development of scalable hybrid surfaces for the study of phase change phenomena, it develops a scalable and rapid stamping protocol for the cost-effective manufacture of next-generation hybrid wettability surfaces.