Ali Usman, Siddique Javed I
Department of Mathematics, Capital University of Science and Technology, Islamabad, Pakistan.
Department of Mathematics, Penn State University, York, Pennsylvania, USA.
Comput Methods Biomech Biomed Engin. 2020 Jul;23(9):524-535. doi: 10.1080/10255842.2020.1744134. Epub 2020 May 7.
In the present article, we investigate the biomechanical response of a fiber reinforced solid matrix (soft tissue) saturated with an electrically conducting fluid. A constant magnetic field was exposed to the binary mixture of fluid and deformable porous solid. The governing mechanism of multiphasic deformation was based on the loading imposed at the rigid bony interface. The fluid flow through the cartilage network depends upon the rate of applied compression and strain-dependent permeability of the solid matrix. The components of the mixture were intrinsically incompressible; however, in the derivation of governing dynamics, the visco-elastic behavior of the solid and an interstitial fluid was developed. The continuum mixture theory was employed in modeling solid deformation and local fluid pressure. We incorporated strain-dependent permeability in the governing equations of binary mixture that was found in an early experimental study. The governing non-linear coupled system of partial differential equations was developed for the solid deformation and fluid pressure in the presence of Lorentz forces. In the case of strain-dependent permeability, a numerical solution is computed using the method of lines (MOL), whereas, the exact solution is provided when permeability is kept constant. Graphical results highlight the influence of various physical parameters on both solid displacement and fluid pressure.
在本文中,我们研究了一种充满导电流体的纤维增强固体基质(软组织)的生物力学响应。对流体与可变形多孔固体的二元混合物施加了恒定磁场。多相变形的控制机制基于在刚性骨界面处施加的载荷。通过软骨网络的流体流动取决于施加的压缩速率和固体基质的应变相关渗透率。混合物的各组分本质上是不可压缩的;然而,在控制动力学的推导中,考虑了固体和间隙流体的粘弹性行为。连续介质混合物理论被用于对固体变形和局部流体压力进行建模。我们在二元混合物的控制方程中纳入了应变相关渗透率,这是在早期实验研究中发现的。针对存在洛伦兹力时的固体变形和流体压力,建立了控制非线性耦合偏微分方程组。在应变相关渗透率的情况下,使用线方法(MOL)计算数值解,而当渗透率保持恒定时,则提供精确解。图形结果突出了各种物理参数对固体位移和流体压力的影响。