Strikos S, Joseph B, Alabarse F G, Valadares G, Costa D G, Capaz Rodrigo B, ElMassalami M
Instituto de Física, Universidade Federal do Rio de Janeiro, CxP 68528, 21945-972 Rio de Janeiro, Brazil.
Elettra Sincrotrone Trieste, S.S. 14 km 163.5, Area Science Park 34149 Basovizza, Trieste, Italy.
J Phys Condens Matter. 2020 Jun 17;32(36). doi: 10.1088/1361-648X/ab9268.
We investigated the pressure dependence of the crystal structure of CaAlSiby means ofcalculations and room-temperature synchrotron x-ray powder diffraction.calculations reproduce satisfactorily the experimentally observed pressure-dependent structural evolution up to 3 GPa where the title system remains in the trigonalP3¯m1phase. In the pressure range 3-8 GPa, pressure evolution of the calculated in-plane lattice parameters is steeper than the observed.calculations predict a structural phase transition to a tetragonal phase (P3¯m1to I4/mmm) near 7.5 GPa for zero (or room) temperature. Temperature effects are included through calculation of vibrational properties (phonon spectra). These calculations confirm that both phases are either globally or locally stable (metastable) and allow for the construction of a-phase diagram for this system. However, our experiments show no sign of such a transition up to 12 GPa. Such a discrepancy can be explained if one considers the trigonal (P3¯m1) structure to be metastable above the critical pressure, but is separated from the predicted tetragonal (I4/mmm) structure by a relatively high energy barrier. The applied pressure alone may not be able to surpass the energy-barrier; rather a joint high-pressure and high-temperature (HPHT) treatment may lead to it. However, empirical verification of such a hypothetical transition may be hampered by the chemistry of CaAlSisystem which shows tendency to decompose peritectically into CaAlSiand aluminum under HPHT treatment.
我们通过计算和室温同步辐射X射线粉末衍射研究了CaAlSi晶体结构的压力依赖性。计算结果令人满意地再现了实验观察到的高达3 GPa的压力依赖性结构演变,在此压力下标题体系保持在三角P3¯m1相中。在3 - 8 GPa的压力范围内,计算得到的面内晶格参数的压力演变比观察到的更陡峭。计算预测在零(或室温)温度下,在接近7.5 GPa时会发生向四方相(从P3¯m1到I4/mmm)的结构相变。通过计算振动性质(声子谱)纳入了温度效应。这些计算证实这两个相在全局或局部都是稳定的(亚稳的),并允许构建该体系的相图。然而,我们的实验表明在高达12 GPa时没有这种转变的迹象。如果认为三角(P3¯m1)结构在临界压力以上是亚稳的,但与预测的四方(I4/mmm)结构被一个相对较高的能垒隔开,那么这种差异就可以得到解释。仅施加压力可能无法跨越能垒;相反,联合高压和高温(HPHT)处理可能会导致这种转变。然而,这种假设转变的经验验证可能会受到CaAlSi体系化学性质的阻碍,该体系在HPHT处理下显示出包晶分解为CaAlSi和铝的趋势。