Li Jiang, Yin Yanlong, Guo Jingshu, Liu Chaoyue, Dai Daoxin
Opt Express. 2020 Apr 13;28(8):10725-10736. doi: 10.1364/OE.386103.
Graphene has emerged as a promising solution for on-chip ultrafast photodetection for its advantages of easy integration, high mobility, adjustable chemical potential, and wide operation wavelength range. In order to realize high-performance photodetectors, it is very important to achieve efficient light absorption in the active region. In this work, a compact and high-speed hybrid silicon/graphene photodetector is proposed and demonstrated by utilizing an ultra-thin silicon photonic waveguide integrated with a loop mirror. With this design, the graphene absorption rate for the fundamental mode of TE polarization is improved by ∼5 times compared to that in the conventional hybrid silicon/graphene waveguide with h=220 nm. One can achieve 80% light absorption ratio within the active-region length of only 20 µm for the present silicon/graphene waveguide photodetector at 1550 nm. For the fabricated device, the responsivity is about 25 mA/W under 0.3V bias voltage and the 3-dB bandwidth is about 17 GHz. It is expected to achieve very high bandwidth by introducing high-quality AlO insulator layers and reducing the graphene channel length in the future.
石墨烯因其易于集成、高迁移率、可调节化学势和宽工作波长范围等优点,已成为片上超快光探测的一种有前景的解决方案。为了实现高性能光探测器,在有源区实现高效光吸收非常重要。在这项工作中,通过利用集成了环形镜的超薄硅光子波导,提出并演示了一种紧凑且高速的混合硅/石墨烯光探测器。通过这种设计,与h = 220 nm的传统混合硅/石墨烯波导相比,TE偏振基模的石墨烯吸收率提高了约5倍。对于当前的硅/石墨烯波导光探测器,在1550 nm波长下,仅在20 µm的有源区长度内就能实现80%的光吸收率。对于所制备的器件,在0.3V偏置电压下响应度约为25 mA/W,3 dB带宽约为17 GHz。预计未来通过引入高质量的AlO绝缘层并减小石墨烯沟道长度可实现非常高的带宽。