Moving to CoPACaPAnA: Implementation of a continuous protein A capture process for antibody applications within an end-to-end single-use GMP manufacturing downstream process.

For the first time to our knowledge the implementation of a continuous protein A capture process for antibody applications (CoPACaPAnA) embedded in an end-to-end single-use 500 L GMP manufacturing downstream process of a multispecific monoclonal antibody (mAb) using a single-use SMB system was conducted. Throughout the last years, a change concerning the pipelines in pharmaceutical industry could be observed, moving to a more heterogeneous portfolio of antibodies, fusion proteins and nanobodies. Trying to adjust purification processes to these new modalities, a higher degree of flexibility and lower operational and capital expenditure is desired. The implementation of single-use equipment is a favored solution for increasing manufacturing agility and it has been demonstrated that continuous processing can be beneficial concerning processing cost and time. Reducing protein A resin resulted in 59% cost reduction for the protein A step, with additional cost reduction also for the intermediate and polishing step due to usage of disposable technology. The downstream process applied here consisted of three chromatography steps that were all conducted on a single-use SMB system, with the capture step being run in continuous mode while intermediate and polishing was conducted in batch mode. Further, two steps dedicated to virus inactivation/ removal and three filtration steps were performed, yielding around 100 g of drug substance going into clinical phase I testing. Therefore, in this study it has been demonstrated that employing a continuous capture within a GMP single-use downstream processing chain is feasible and worthy of consideration among the biotech industry for future application to modality-diverse pipelines.