Suppr超能文献

建模奶酪在成熟过程中的减重以及奶制品体系、胎次、泌乳阶段和加工牛奶成分的影响。

Modeling weight loss of cheese during ripening and the influence of dairy system, parity, stage of lactation, and composition of processed milk.

机构信息

Department of Veterinary Science, University of Parma, 43126 Parma, Italy.

Department of Veterinary Science, University of Parma, 43126 Parma, Italy.

出版信息

J Dairy Sci. 2020 Aug;103(8):6843-6857. doi: 10.3168/jds.2019-17829. Epub 2020 May 29.

Abstract

The yield, flavor, and texture of ripened cheese result from numerous interrelated microbiological, biochemical, and physical reactions that take place during ripening. The aims of the present study were to propose a 2-compartment first-order kinetic model of cheese weight loss over the ripening period; to test the variation in new informative phenotypes describing this process; and to assess the effects on these traits of dairy farming system, individual farms within dairy system, animal factors, and milk composition. A total of 1,211 model cheeses were produced in the laboratory using individual 1.5-L milk samples from Brown Swiss cows reared on 83 farms located in Trento Province. During ripening (60 d; temperature 15°C, relative humidity 85%), the weight of all model cheeses was measured, and cheese yield (cheese weight/processed milk weight, %CY) was calculated at 7 intervals from cheese-making (0, 1, 7, 14, 28, 42, and 60 d). Using these measures, a 2-compartment first-order kinetic model (3-parameter equation) was developed for modeling %CY during the ripening period, as follows: [Formula: see text] , where %CY is the %CY at ripening time t; %CY and %CY are the modeled %CY traits at time 0 d (%CY = initial %CY) and at the end of a ripening period sufficient to reach a constant wheel weight (%CY = final %CY after 60 d ripening in the case of small model cheeses); k is the instant rate constant for cheese weight loss (%/d). Cheese weight and protein and fat losses were calculated as the % difference between the model cheeses at 0 and after 60 d of ripening. The variation in cheese pH was calculated as the % difference between pH at 0 and after 60 d. Dairy system, individual herd within dairy system, and the cow's parity and lactation stage (tested with a linear mixed model) strongly affected almost all the traits collected during model cheese ripening. Milk fat, protein, lactose, pH, and somatic cell score also greatly affected almost all the traits, although k was affected only by milk protein. After including milk composition in the linear mixed model, the importance of all the herd and animal sources of variation was greatly reduced for all traits. The proposed model and novel traits could be tested, first, with the aim of establishing new monitoring procedures enabling the dairy industry to improve milk quality-based payment systems at the herd level and, second, with a view to exploring possible genetic improvements to dairy cow populations.

摘要

成熟奶酪的产量、风味和质地源于在成熟过程中发生的许多相互关联的微生物学、生物化学和物理反应。本研究的目的是提出一个 2 隔室一级动力学模型来描述奶酪在成熟过程中的重量损失;测试描述该过程的新信息表型的变化;并评估乳制品系统、乳制品系统内的单个农场、动物因素和牛奶成分对这些特性的影响。使用个体 1.5 升牛奶样本,在实验室中生产了 1211 个模型奶酪,这些牛奶样本来自在特伦托省 83 个农场饲养的棕色瑞士奶牛。在成熟过程中(60 天;温度 15°C,相对湿度 85%),测量了所有模型奶酪的重量,并在奶酪制作后 7 个时间点(0、1、7、14、28、42 和 60 天)计算了奶酪产量(奶酪重量/加工牛奶重量,%CY)。使用这些测量值,开发了一个用于模拟成熟过程中%CY 的 2 隔室一级动力学模型(3 个参数方程),如下所示:[公式:见文本],其中%CY 是成熟时间 t 时的%CY;%CY 和%CY 是时间 0 d 时的模型%CY 特征(%CY=初始%CY)和成熟周期结束时的特征(在小模型奶酪的情况下,60 天成熟后达到恒定轮重时的%CY =最终%CY);k 是奶酪重量损失的瞬时速率常数(%/d)。奶酪重量和蛋白质、脂肪损失分别计算为模型奶酪在 0 天和 60 天成熟后的%差异。奶酪 pH 的变化计算为 0 天和 60 天后 pH 的%差异。乳制品系统、乳制品系统内的个体牛群以及奶牛的胎次和泌乳阶段(用线性混合模型测试)强烈影响了在模型奶酪成熟过程中收集的几乎所有特性。牛奶脂肪、蛋白质、乳糖、pH 和体细胞评分也极大地影响了几乎所有特性,尽管 k 仅受牛奶蛋白质的影响。在线性混合模型中包含牛奶成分后,所有牛群和动物来源的变异的重要性大大降低了所有特性。所提出的模型和新特性可以首先进行测试,目的是建立新的监测程序,使乳制品行业能够改进基于牛奶质量的牛群水平支付系统,其次是探索对奶牛种群进行可能的遗传改良。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验