Suppr超能文献

优化难溶性药物从水性原位凝胶系统的眼部给药。

Optimizing ophthalmic delivery of a poorly water soluble drug from an aqueous in situ gelling system.

作者信息

Senjoti F G, Timmins P, Conway B R, Smith A M

机构信息

Department of Pharmacy, School of Applied Sciences, University of Huddersfield, Queensgate, Huddersfield HD1 3DH, UK.

Department of Pharmacy, School of Applied Sciences, University of Huddersfield, Queensgate, Huddersfield HD1 3DH, UK.

出版信息

Eur J Pharm Biopharm. 2020 Sep;154:1-7. doi: 10.1016/j.ejpb.2020.06.016. Epub 2020 Jun 27.

Abstract

Poorly soluble drugs are often unsuitable to incorporate in ocular in situ gelling systems due to the aqueous based gelling formulations and low volumes administered. For such formulations to be successful, the administered drug must have sufficient solubility to diffuse from the formulation to the eye and should not affect the gelation of the in situ gelling material. Drug salt forms can improve the solubility of poorly soluble drugs, however, as in situ gel forming formulations are often designed to be crosslinked by salts (present the lacrimal fluid) it can make salt forms difficult to formulate. The aim of this study was to develop an in situ gel forming ophthalmic formulation of a poorly soluble drug flurbiprofen (FBP) through cyclodextrin complex formation and to analyse the impact on gelation, release and permeation through the cornea. Hydroxypropyl-beta-cyclodextrin (HβCD) was used as a complexing agent and low acyl gellan gum was added to the FBP- HβCD complex as a water soluble in situ gelling polymer. Measurements were performed using rheo-dissolution, which utilises a rheometer with a modified lower plate that has the unique ability to allow rheological measurement and analysis of drug release simultaneously. An ex-vivo permeation study was also performed using porcine cornea. Rheological measurements in terms of elastic (G') and viscous (G″) modulus showed rapid gelation of the formulation upon contact with simulated lacrimal fluid (SLF). Approximately, 97% FBP was released when 10% HβCD was used and release was decreased to 79% when the amount of HβCD was increased to 20%. The percentage of drug permeation through the cornea was 55% in 300 min whereas the marketed non gelling eye drop formulation containing FBP sodium showed only 37% permeation. The data presented here, revealed that not only could a poorly soluble drug be complexed with cyclodextrin and loaded into an in situ gelling system without interfering with the gelation, but also permeability the of the drug improved.

摘要

由于基于水的凝胶制剂以及给药体积较小,难溶性药物通常不适用于眼部原位凝胶系统。要使此类制剂成功,给药的药物必须具有足够的溶解度,以便从制剂扩散到眼睛,并且不应影响原位凝胶材料的凝胶化。药物盐形式可以提高难溶性药物的溶解度,然而,由于原位凝胶形成制剂通常设计为由盐(存在于泪液中)交联,这可能使盐形式难以配制。本研究的目的是通过环糊精复合物的形成来开发一种难溶性药物氟比洛芬(FBP)的原位凝胶形成眼用制剂,并分析其对凝胶化、释放和角膜渗透的影响。羟丙基-β-环糊精(HβCD)用作络合剂,低酰基结冷胶作为水溶性原位凝胶聚合物添加到FBP-HβCD复合物中。使用流变溶解法进行测量,该方法使用具有改进的下板的流变仪,该下板具有同时进行流变学测量和药物释放分析的独特能力。还使用猪角膜进行了体外渗透研究。弹性(G')和粘性(G'')模量的流变学测量表明,制剂与模拟泪液(SLF)接触后迅速凝胶化。当使用10%的HβCD时,约97%的FBP被释放,当HβCD的量增加到20%时,释放率降至79%。药物在300分钟内透过角膜的百分比为55%,而市售的含FBP钠的非凝胶眼药水制剂的渗透率仅为37%。此处给出的数据表明,不仅难溶性药物可以与环糊精络合并加载到原位凝胶系统中而不干扰凝胶化,而且药物的渗透性也得到了提高。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验