Robotic Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran.
Phys Eng Sci Med. 2020 Sep;43(3):903-914. doi: 10.1007/s13246-020-00887-y. Epub 2020 Jun 30.
Manipulation of biological particles including pulling, and holding-and-indenting them, using the atomic force microscope (AFM) has attracted enormous interests. High deformability and vulnerability of biological particles, especially cells, make moving toward the target point inside complex biological environments with the least invasion the most critical factor. In this article, the optimal path of the particle movement is determined by considering the mechanical and morphological properties of the biological cell. Furthermore, the shortest path with the least amount of cell deformation is determined by using the equations of 3D manipulation of spherical viscoelastic particles and genetic algorithm (GA). Eventually, the final path is determined considering the mechanical properties of breast cancer cells by applying different constraints such as folding factor and the particle's roughness.Results reveal that increasing the number of constraints raise the needed time to find the optimal path. Additionally, the maximum time belongs to the spherical particle in the presence of folding. As a result, the total path planning times for the smooth, rough, and folded spherical particle are 59.386, 129.578, and 214.404 s, respectively. Various optimal pathfinders are used, to reduce calculations and speed up the process, as well as obtaining the correct answer with high certainty. Comparing the error files founded for three methods including cellular learning Automata, Dijkstra, and GA, the third method has the best performance in the lowest error rate. Using the GA, the error rate can be reduced by 40%, compared to the cellular learning Automata method. Furthermore, comparing the cellular learning Automata method used in previous studies, it can be seen that not only the results are correct, but also less time spent, at the practically identical situation, on finding the optimal path for this algorithm.
使用原子力显微镜(AFM)对生物颗粒(包括拉拽和压陷)进行操控吸引了极大的兴趣。生物颗粒,尤其是细胞,具有很高的可变形性和脆弱性,因此在复杂的生物环境中以最小的侵入性向目标点移动是最关键的因素。在本文中,通过考虑生物细胞的力学和形态特性来确定颗粒运动的最优路径。此外,通过使用 3D 球形粘弹性颗粒操纵方程和遗传算法(GA)来确定具有最小细胞变形量的最短路径。最终,通过应用不同的约束条件(如折叠因子和颗粒粗糙度)来考虑乳腺癌细胞的力学特性,确定最终路径。结果表明,增加约束条件的数量会增加找到最优路径所需的时间。此外,最大时间属于存在折叠时的球形粒子。因此,光滑、粗糙和折叠的球形粒子的总路径规划时间分别为 59.386、129.578 和 214.404 s。使用各种最优路径查找器来减少计算量并加快进程,并以高置信度获得正确答案。将三种方法(细胞学习自动机、Dijkstra 和 GA)的误差文件进行比较,发现第三种方法在最低错误率方面表现最佳。与细胞学习自动机方法相比,使用 GA 可以将错误率降低 40%。此外,与之前研究中使用的细胞学习自动机方法相比,不仅结果正确,而且在相同的实际情况下,找到该算法的最优路径所需的时间也更少。