Plant Biomechanics Group, Botanic Garden, Faculty of Biology, University of Freiburg, Schänzlestraße 1, D-79104 Freiburg, Germany.
Cluster of Excellence livMatS @ FIT-Freiburg Center for I,nteractive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-Allee 105, D-79110 Freiburg, Germany.
Int J Mol Sci. 2020 Jun 29;21(13):4630. doi: 10.3390/ijms21134630.
Damage-repair is particularly important for the maintenance of the water-storing abilities of succulent plants such as cacti. Comparative morphological, anatomical, and biomechanical analyses of self-repair were performed on artificially wounded branches of and . Macroscopic observations, contrast staining, and lignin-proof staining were used to investigate morphological and anatomical responses after wounding at various time intervals. Two-point bending tests were repeatedly performed on the same branches under unwounded, freshly wounded, and healed conditions by using customized 3D-printed clamping jaws. Morphologically, both species showed a rolling-in of the wound edges, but no mucilage discharge. Anatomically, ligno-suberized peridermal layers developed that covered the wound region, and new parenchyma cells formed, especially in . In all samples, the wounding effect directly after damage caused a decrease between 18% and 37% in all the tested mechanical parameters, whereas a positive healing effect after 21 days was only found for . Based on our data, we hypothesize a high selection pressure on the restoration of structural integrity in the wound area, with a focus on the development of efficient water-retaining mechanisms, whereas the concept of "sufficient is good enough" seems to apply for the restoration of the mechanical properties.
损伤修复对于肉质植物(如仙人掌)保持储水能力尤为重要。我们对 和 进行了人工损伤的枝条的自我修复的比较形态学、解剖学和生物力学分析。通过宏观观察、对比染色和木质素证明染色,研究了不同时间间隔后伤口的形态和解剖学反应。通过定制的 3D 打印夹具,在未受伤、新受伤和愈合条件下,对同一枝条反复进行两点弯曲测试。形态上,两种植物的伤口边缘都向内卷曲,但没有黏液排出。木质素-栓质化的周皮层形成,覆盖了伤口区域,并且形成了新的薄壁细胞,尤其是在 中。在所有样本中,损伤后直接造成的损伤效应导致所有测试机械参数下降 18%至 37%,而 21 天后的愈合效应仅在 中发现。基于我们的数据,我们假设在伤口区域恢复结构完整性方面存在较高的选择压力,重点是开发高效的保水机制,而“足够好”的概念似乎适用于恢复机械性能。