Department of Chemistry and Biology, Ryerson University, Toronto, Ontario, Canada.
Department of Chemistry and Biology, Ryerson University, Toronto, Ontario, Canada.
J Colloid Interface Sci. 2020 Nov 15;580:630-637. doi: 10.1016/j.jcis.2020.06.106. Epub 2020 Jul 10.
Micron and nano-scale particles are increasingly used to stabilize water-in-oil (W/O) emulsions. Though remarkably stable, the resulting emulsions can be broken by adding low molecular weight surfactants that modify the wettability of the interfacially-adsorbed particles.
W/O emulsions were prepared using lipophilic crystals of the monoglyceride glycerol monostearate (GMS), followed by addition of sorbitan monooleate (SMO) at concentrations below and above its critical micelle concentration (CMC). Systematic measurements of interfacial tension and three-phase contact angles, as well as characterization of emulsion sedimentation and microstructure, were used to assess GMS crystal wettability and emulsion destabilization.
GMS crystals formed shells around the dispersed droplets, resulting in emulsions stable against breakdown under quiescent conditions. With SMO concentrations added below CMC, emulsion stability was not significantly affected. At SMO concentrations above CMC, the integrity of the crystalline shell was markedly affected. Notably, the GMS crystals transitioned from preferential oil-wet to water-wet behavior, eventually leading to their diffusion into the droplets. Therefore, in-situ modification of particle wettability at the oil-water interface was responsible for emulsion breakdown. Findings from this study may provide a pathway for the design of particle-stabilized W/O emulsions with controllable breakdown properties for applications such as tailored release of aqueous bioactive compounds.
微米和纳米级颗粒越来越多地被用于稳定油包水 (W/O) 乳液。尽管这些乳液非常稳定,但通过添加低分子量表面活性剂可以破坏它们,这些表面活性剂可以改变界面吸附颗粒的润湿性。
使用亲脂性单甘油脂甘油单硬脂酸酯 (GMS) 的晶体制备 W/O 乳液,然后在低于和高于其临界胶束浓度 (CMC) 的浓度下添加山梨醇单油酸酯 (SMO)。系统地测量界面张力和三相接触角,以及乳液沉降和微观结构的表征,用于评估 GMS 晶体润湿性和乳液失稳。
GMS 晶体在分散液滴周围形成壳,从而使乳液在静止条件下稳定,不易破裂。在添加低于 CMC 的 SMO 浓度时,乳液稳定性没有受到显著影响。在高于 CMC 的 SMO 浓度下,结晶壳的完整性受到明显影响。值得注意的是,GMS 晶体从优先油湿转变为亲水,最终导致它们扩散到液滴中。因此,油-水界面处颗粒润湿性的原位改性是乳液破裂的原因。本研究的结果可为设计具有可控破裂性能的颗粒稳定 W/O 乳液提供途径,例如用于定制释放水相生物活性化合物的应用。