Department of Vascular Surgery, Maastricht University Medical Centre, Maastricht, the Netherlands; Department of Biomedical Engineering, Maastricht University, Maastricht, the Netherlands; CARIM School for Cardiovascular Diseases, Maastricht University, Maastricht, the Netherlands.
Department of Vascular Surgery, Maastricht University Medical Centre, Maastricht, the Netherlands.
Eur J Vasc Endovasc Surg. 2020 Oct;60(4):568-577. doi: 10.1016/j.ejvs.2020.06.023. Epub 2020 Aug 15.
Arteriovenous grafts (AVGs) are the second best option for haemodialysis access when native arteriovenous fistulae placement is not possible, because they have a lower patency owing to neointimal hyperplasia at the venous anastomosis. This review aimed to evaluate the effect of geometric graft modification to the graft-vein interface on AVG patency.
The MEDLINE and Embase (OvidSP) databases were systematically searched for relevant studies analysing the effect of geometrically modified AVGs on graft patency and stenosis formation (last search July 2019).
Data regarding AVG type, patency, and graft outlet stenosis was extracted for further evaluation. Data were pooled in a random effects model to estimate the relative risk of graft occlusion within one year. Follow up, number of patients, and relevant patient characteristics were extracted for the quality assessment of the included studies using Newcastle-Ottawa Scale and Cochrane Risk of Bias Tool. The quality of the evidence was determined according to the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) system.
Search strategies produced 2772 hits, of which eight articles met predetermined inclusion criteria. Overall, the included articles had low to moderate risk of bias. In total, 414 expanded polytetrafluoroethylene AVGs (232 geometrically modified and 182 standard) were analysed, comprising two modified AVG types: a prosthetic cuff design (Venaflo®) and grafts with a Tyrell vein patch. Overall, modified grafts did not show a statistically significantly higher one year primary (relative risk [RR] 0.86, 95% confidence interval [CI] 95% 0.64-1.16; GRADE: "low to very low") or secondary patency (RR 0.57, 95% CI 0.32-1.02; GRADE: "low to very low") when compared with standard AVGs. Analysis of prosthetic cuffed grafts (112 patients) separately demonstrated a statistically significantly higher one year primary (RR 0.75, 95% CI 0.61-0.91) and one year secondary patency (RR 0.47, 95% CI 0.30-0.75) compared with standard grafts (92 patients). The results on stenosis formation were inconclusive and inadmissible to quantitative analyses.
The meta-analysis showed that a prosthetic cuff design significantly improves AVG patency, while a venous cuff does not. Although the heterogeneity and low number of available studies limit the strength of the results, this review shows the potential of grafts with geometric modification to the graft-vein anastomosis and should stimulate further clinical and fundamental research on improving graft geometry to improve graft patency.
当原生动静脉瘘无法建立时,动静脉移植物(AVG)是血液透析通路的第二选择,因为其静脉吻合处的新生内膜增生导致通畅率较低。本综述旨在评估几何形状修改移植物-静脉界面对 AVG 通畅率的影响。
系统检索了 MEDLINE 和 Embase(OvidSP)数据库中分析几何形状修改的 AVG 对移植物通畅率和狭窄形成影响的相关研究(最后一次检索时间为 2019 年 7 月)。
提取有关 AVG 类型、通畅率和移植物出口狭窄的数据进行进一步评估。采用随机效应模型对一年内移植物闭塞的相对风险进行数据汇总。提取随访时间、患者人数和相关患者特征,采用纽卡斯尔-渥太华量表和 Cochrane 偏倚风险工具对纳入研究进行质量评估。根据推荐、评估、发展和评估(GRADE)系统确定证据质量。
搜索策略产生了 2772 个结果,其中 8 篇文章符合预定的纳入标准。总体而言,纳入的文章具有低至中度的偏倚风险。共有 414 例膨胀聚四氟乙烯移植物(232 例为几何形状修改,182 例为标准)进行了分析,包括两种修改后的移植物类型:人工袖套设计(Venaflo®)和带有 Tyrell 静脉补丁的移植物。总体而言,与标准移植物相比,修改后的移植物在一年内的主要(相对风险 [RR] 0.86,95%置信区间 [CI] 95% 0.64-1.16;GRADE:“低到非常低”)和次要通畅率(RR 0.57,95% CI 0.32-1.02;GRADE:“低到非常低”)方面并未显示出统计学上的显著优势。分别分析人工袖套移植物(112 例患者)的结果显示,与标准移植物(92 例患者)相比,一年内的主要(RR 0.75,95% CI 0.61-0.91)和次要通畅率(RR 0.47,95% CI 0.30-0.75)在统计学上有显著优势。对狭窄形成的分析结果尚无定论,也无法进行定量分析。
荟萃分析表明,人工袖套设计可显著提高 AVG 通畅率,而静脉袖套则不行。尽管异质性和可用研究数量有限限制了结果的强度,但本综述显示出对移植物-静脉吻合处进行几何形状修改的潜力,并应激发进一步的临床和基础研究,以改善移植物几何形状,从而提高移植物通畅率。