Shannon Steven F, Oppizzi Giovanni, Schloss Michael G, Atchison Jared, Nascone Jason, Sciadini Marcus, Zhang Li-Qun, O'Toole Robert V, Jaeblon Todd
R Adams Cowley Shock Trauma Center, Department of Orthopaedics, University of Maryland School of Medicine, Baltimore, MD.
J Orthop Trauma. 2021 Jan 1;35(1):e18-e24. doi: 10.1097/BOT.0000000000001857.
To determine whether fully threaded transiliac-transsacral (TI-TS) fixation is biomechanically superior to partially threaded TI-TS fixation of vertically unstable transforaminal sacral fractures.
Vertically unstable zone 2 sacral fractures were created in 20 human cadaveric pelves with a unilateral osteotomy and resection of 1 cm of bone through the foramen of the sacrum to represent comminution. Ten specimens received either 2 7.3-mm fully threaded or 2 7.3-mm partially threaded TI-TS screw fixation at the S1 and S2 body, and every specimen received standard 3.5-mm 8-hole parasymphyseal plating anteriorly. Each pelvis was loaded to 250 N at 3 Hz for 100,000 cycles and then loaded to failure. The primary outcome was fracture displacement at the S1 foramen, which was measured at 25,000, 50,000, 75,000, and 100,000 cycles. Secondary outcomes were simulated clinical failure of ≥1 cm displacement at the S1 foramen to determine occurrence probability of failure, and load at failure was defined as 2.5 cm of the linear loading system displacement. Specimens in the fully threaded and partially threaded cohorts were otherwise respectively comparable in regards to age, gender, and bone density.
Five of the 10 TI-TS partially threaded specimens experienced simulated clinical failure with >1 cm displacement at the S1 foramen compared with 0 of the 10 TI-TS fully threaded cohort (50% vs. 0%, P = 0.03). The mean maximal displacement at the S1 foramen was greater in the partially threaded cohort (9.3 mm) compared with the fully threaded cohort (3.6 mm; P = 0.004). Fully threaded specimens also demonstrated greater mean force to failure than the partially threaded specimens (461 N vs. 288 N; P = 0.0001).
Fully threaded TI-TS screw fixation seems to be mechanically superior to partially threaded fixation in a cadaveric vertically unstable transforaminal sacral fracture model with significantly less displacement of the posterior pelvic ring and greater load to failure.
确定全螺纹髂骨 - 骶骨(TI - TS)固定在生物力学上是否优于垂直不稳定型经椎间孔骶骨骨折的部分螺纹TI - TS固定。
通过在20具人类尸体骨盆上进行单侧截骨并经骶孔切除1 cm骨质以模拟粉碎,制造垂直不稳定的2区骶骨骨折。10个标本在S1和S2椎体处接受2枚7.3 mm全螺纹或2枚7.3 mm部分螺纹的TI - TS螺钉固定,每个标本均在前方接受标准的3.5 mm 8孔耻骨联合旁钢板固定。每个骨盆以3 Hz的频率加载至250 N,持续100,000次循环,然后加载至破坏。主要观察指标是S1孔处的骨折移位,在25,000、50,000、75,000和100,000次循环时进行测量。次要观察指标是模拟临床失败情况,即S1孔处移位≥1 cm,以确定失败发生概率,破坏载荷定义为线性加载系统位移2.5 cm时的载荷。全螺纹组和部分螺纹组的标本在年龄、性别和骨密度方面分别具有可比性。
10个部分螺纹TI - TS标本中有5个在S1孔处出现模拟临床失败,移位>1 cm,而10个全螺纹TI - TS组中无一例出现(50%对0%,P = 0.03)。部分螺纹组S1孔处的平均最大移位(9.3 mm)大于全螺纹组(3.6 mm;P = 0.004)。全螺纹标本的平均破坏力也高于部分螺纹标本(461 N对288 N;P = 0.0001)。
在尸体垂直不稳定型经椎间孔骶骨骨折模型中,全螺纹TI - TS螺钉固定在力学上似乎优于部分螺纹固定,后骨盆环移位明显更小,破坏载荷更大。